Work

calibration_and_testing/exp01_sensor_calibration.md

@@ -1,16 +1,43 @@
 # Experiment 01 - Sensor Calibration
 
-- Purpose: to understand how the values provided by sensor XXX vary in
+## Purpose
-  different humidity conditions.
+
-- Components:
+The purpose of experiment 1 is to map the analog output values of the hydration
-    - Arduino Proto
+sensor to different levels of water concentration in soil. This mapping will be
-    - Sensor XXX
+necessary to adjust the user experience of the final device.
-- Methodology
+
-    - Prepare the board and sensor to take measurements.
+## Components and equipment
-    - Prepare production code and alternative code with raw values.
+
-    - Prepare 6 testing conditions: air, water, and three pots with different
+- Arduino board to run code
-      humidity conditions (completely dry, XXXml watered, XXXml watered and
+- Three male to male jumper cables
-      XXXml watered).
+- One moisture sensor
-    - Perform raw and production-grade measurements in each environment.
+- A cup of soil
-- Results
+- Water
-- Take-aways
+
+## Methodology
+
+1. Prepare the code. Three versions of the code will be used raw, slightly
+   smoothed and heavily smoothed.
+    - Raw version outputs the sensor's measurement to the serial port in
+      real-time, unfiltered.
+    - The slightly smoothed version will take 10 measurements with 50ms of
+      delay between each and return the mean.
+    - The heaviliy smoothe version will take 100 measurements with 50ms of
+      delay between each and return the mean.
+2. Prepare the soil
+    - In a small recipient (weight: 80g), place 200g of soil.
+    - Let it dry for X days (collection on 24/10/2022) to obtain the driest
+      possible soil.
+3. The next steps will be performed repeteadly by adding 10ml of water to the
+   soil at each step. Start by first measuring the completely dry-soil. Ensure
+   that the water is distributed uniformly across the soil. For each amount of
+   water up to a max of 200ml, and for each version of the code:
+    - Obtain measurements from the sensor. If the measurement is unstable,
+      record the observed range and the most frequent value.
+4. Finally, obtain measurements in a glass of pure water, with no soil at all.
+
+## Results
+
+Make line chart with measurement by hydration level.
+
+## Conclusions

components.md

@@ -7,4 +7,8 @@
     - https://www.electroya.com/producto/arduino-nano-v3-ch340/
     - https://www.electrohobby.es/placas-arduino/388-nano-ch340g.html
     - https://tienda.bricogeek.com/arduino/12-arduino-nano-8058333490342.html
-- 
+    - https://www.az-delivery.de/en/products/nano-v3-mit-ftdi-arduino-kompatibel
+- Moisture Sensor:
+  - Docs: https://cdn.shopify.com/s/files/1/1509/1638/files/Hygrometer_V1.2_Sensor_Modul_Datenblatt_AZ-Delivery_Vertriebs_GmbH.pdf?v=1608545956
+  - Buy:
+    - https://www.az-delivery.de/en/products/bodenfeuchte-sensor-modul-v1-2?variant=12461193920608

engineer_log.md

@@ -31,6 +31,19 @@ sensors being on the market for a long time. It's definetely a design challenge
 if you can't count on that and future alternatives might not work exactly the
 same way or require a different calibration procedure.
 
+## 20221024
+
+I have discovered this germany shop called AZDelivery. It's heaven. They have
+plenty of good stuff, all in stock, free deliveries with a relatively low
+basket value and they offer volume-discounts. It's sad that we don't have such
+a page here in Spain and we get pushed to look for this kind of service
+outside.
+
+But for now, I have found a guy in my neighbourhood that sells exactly the
+moisture sensors I intend to try. Sometimes fortune smiles on us. I'll get in
+touch with him to get the sensors this week. With that, I can keep on
+experimenting and designing the device.
+
 ## Open topics
 
 - How to measure how much power a circuit is consuming.