a few things

.gitignore

@@ -1 +1,2 @@
 inventory.ini
+venv/*

01_infra_setup.md

@@ -1,28 +1,45 @@
-# 01. Infra Setup
+# 01 Infra Setup
 
 This describes how to prepare each machine before deploying services on them.
 
-## 01.01 First steps
+## First steps
 
 * Create an ssh key or pick an existing one. We'll refer to it as the `personal_ssh_key`.
-* The guide assumes the laptop (Lapy) has `ansible` installed. If not, do `sudo apt install -y ansible` and `ansible --version` to check.
+* Deploy ansible on the laptop (Lapy), which will act as the ansible control node. To do so:
+  * Create a `venv`: `python3 -m venv venv`
+  * Activate it: `source venv/bin/activate`
+  * Install the listed ansible requirements with `pip install -r requirements.txt`
+* Keep in mind you should activate this `venv` from now on when running `ansible` commands.
 
-## 01.02 Prepare the VPS (Vipy)
+## Domain
 
-### 01.02.01 Source the VPS
+* Some services are designed to be accessible through WAN through a friendly URL.
+* You'll need to have a domain where you can set DNS records and have the ability to create different subdomains, as the guide assumes each service will get its own subdomain.
+* Getting and configuring the domain is outside the scope of this repo. Whenever a service needs you to set up a subdomain, it will be mentioned explictly.
+* You should add the domain to the var `root_domain` in `ansible/infra_vars.yml`.
 
-* The guide is agnostic to which provider you pick, but has been tested with VMs from https://lnvps.net.
+## Prepare the VPS (Vipy)
+
+### Source the VPS
+
+* The guide is agnostic to which provider you pick, but has been tested with VMs from https://99stack.com and contains some operations that are specifically relevant to their VPSs.
 * The expectations are that the VPS ticks the following boxes:
   + Runs Debian 12 bookworm.
   + Has a public IP4 and starts out with SSH listening on port 22.
-  + Boots with one of your SSH keys already authorized.
+  + Boots with one of your SSH keys already authorized. If this is not the case, you'll have to manually drop the pubkey there before using the playbooks.
-* Move on once your VPS is running.
+* Move on once your VPS is running and satisfies the prerequisites.
 
-### 01.02.02 Prepare Ansible vars
+### Prepare Ansible vars
 
-* You have an example `infra/example.inventory.ini`. Copy it with `cp example.inventory.ini inventory.ini` and fill in with the vars for your VPS.
+* You have an example `ansible/example.inventory.ini`. Copy it with `cp ansible/example.inventory.ini ansible/inventory.ini` and fill in with the values for your VPS.
+* A few notes:
+  * The guides assume you'll only have one VPS in the `[Vipy]` group. Stuff will break if you have multiple, so avoid that.
 
-### 01.02.03 First steps with Ansible
+### Create user and secure VPS access
 
-* cd into `infra`
+* Ansible will create a user on the first playbook `01_basic_vps_setup_playbook.yml`. This is the user that will get used regularly. But, since this user doesn't exist, you obviosuly need to first run this playbook from some other user. We assume your VPS provider has given you a root user, which is what you need to define as the running user in the next command.
-* Run `ansible-playbook playbook.yml`
+* cd into `ansible`
+* Run `ansible-playbook -i inventory.ini infra/01_user_and_access_setup_playbook.yml -e 'ansible_user="your root user here"'`
+* Then, configure firewall access, fail2ban and auditd with `ansible-playbook -i inventory.ini infra/02_firewall_and_fail2ban_playbook.yml`. Since the user we will use is now present, there is no need to specify the user anymore.
+
+Note that, by applying this playbooks, both the root user and the `counterweight` user will use the same SSH pubkey for auth.

02_vps_core_services_setup.md

@@ -0,0 +1,104 @@
+# 02 VPS Core Services Setup
+
+Now that Vipy is ready, we need to deploy some basic services which are foundational for the apps we're actually interested in.
+
+This assumes you've completed the markdown `01`.
+
+## General tools
+
+This repo contains some rather general tools that you may or may not need depending on what services you want to deploy and what device you're working on. This tools can be installed with the `900` group of playbooks sitting at `ansible/infra`. 
+
+By default, these playbooks are configured for `hosts: all`. Be mindful if you want to limit, you can use the `--limit groupname` flag when running the playbook.
+
+Below you have notes on adding each specific tool to a device.
+
+### rsync
+
+Simply run the playbook:
+
+```
+ansible-playbook -i inventory.ini infra/900_install_rsync.yml
+```
+
+### docker and compose
+
+Simply run the playbook:
+
+```
+ansible-playbook -i inventory.ini infra/910_docker_playbook.yml
+```
+
+
+## Deploy Caddy
+
+* Use Ansible to run the caddy playbook:
+    
+    ```
+    cd ansible
+    ansible-playbook -i inventory.ini services/caddy_playbook.yml
+    ```
+
+* Starting config will be empty. Modifying the caddy config file to add endpoints as we add services is covered by the instructions of each service.
+
+
+## Uptime Kuma
+
+Uptime Kuma gets used to monitor the availability of services, keep track of their uptime and notify issues.
+
+### Deploy
+
+* Decide what subdomain you want to serve Uptime Kuma on and add it to `services/uptime_kuma/uptime_kuma_vars.yml` on the `uptime_kuma_subdomain`.
+    * Note that you will have to add a DNS entry to point to the VPS public IP.
+* Make sure docker is available on the host.
+* Run the deployment playbook: `ansible-playbook -i inventory.ini services/uptime_kuma/deploy_uptime_kuma_playbook.yml`.
+
+### Set up backups to Lapy
+
+* Make sure rsync is available on the host and on Lapy.
+* Run the backup playbook: `ansible-playbook -i inventory.ini services/uptime_kuma/setup_backup_uptime_kuma_to_lapy.yml`.
+* A first backup process gets executed and then a cronjob is set up to refresh backups periodically.
+
+### Configure
+
+* Uptime Kuma will be available for you to create a user on first start. Do that and store the creds safe.
+* From that point on, you can configure through the Web UI.
+
+### Restoring to a previous state
+
+* Stop Uptime Kuma.
+* Overwrite the data folder with one of the backups.
+* Start it up again.
+
+
+## Vaultwarden
+
+Vaultwarden is a credentials manager.
+
+### Deploy
+
+* Decide what subdomain you want to serve Vaultwarden on and add it to `services/vaultwarden/vaultwarden_vars.yml` on the `vaultwarden_subdomain`.
+    * Note that you will have to add a DNS entry to point to the VPS public IP.
+* Make sure docker is available on the host.
+* Run the deployment playbook: `ansible-playbook -i inventory.ini services/vaultwarden/deploy_vaultwarden_playbook.yml`.
+
+### Configure
+
+* Vaultwarden will be available for you to create a user on first start. Do that and store the creds safely.
+* From that point on, you can configure through the Web UI.
+
+### Disable registration
+
+* You probably don't want anyone to just be able to register without permission.
+* To prevent that, you can run the playbook `disable_vaultwarden_sign_ups_playbook.yml` after creating the first user.
+
+### Set up backups to Lapy
+
+* Make sure rsync is available on the host and on Lapy.
+* Run the backup playbook: `ansible-playbook -i inventory.ini services/vaultwarden/setup_backup_vaultwarden_to_lapy.yml`.
+* A first backup process gets executed and then a cronjob is set up to refresh backups periodically.
+
+### Restoring to a previous state
+
+* Stop Vaultwarden.
+* Overwrite the data folder with one of the backups.
+* Start it up again.

README.md

@@ -2,6 +2,10 @@
 
 My repo documenting my personal infra, along with artifacts, scripts, etc.
 
+## How to use
+
+Go through the different numbered markdowns in the repo root to do the different parts.
+
 ## Overview
 
 ### Services

ansible/example.inventory.ini

@@ -0,0 +1,7 @@
+[vipy]
+your.vps.ip.here ansible_user=counterweight ansible_port=22 ansible_ssh_private_key_file=~/.ssh/your-key
+
+# Local connection to laptop: this assumes you're running ansible commands from your personal laptop
+# Make sure to adjust the username
+[lapy]
+localhost ansible_connection=local ansible_user=your laptop user

ansible/infra/01_user_and_access_setup_playbook.yml

@@ -0,0 +1,72 @@
+- name: Secure Debian VPS
+  hosts: vipy
+  vars_files:
+    - ../infra_vars.yml
+  become: true
+
+  tasks:
+    - name: Update and upgrade apt packages
+      apt:
+        update_cache: yes
+        upgrade: full
+        autoremove: yes
+
+    - name: Create new user
+      user:
+        name: "{{ new_user }}"
+        groups: sudo
+        shell: /bin/bash
+        state: present
+        create_home: yes
+
+    - name: Set up SSH directory for new user
+      file:
+        path: "/home/{{ new_user }}/.ssh"
+        state: directory
+        mode: "0700"
+        owner: "{{ new_user }}"
+        group: "{{ new_user }}"
+
+    - name: Copy current user's authorized_keys to new user
+      copy:
+        src: "{{ (ansible_user == 'root') | ternary('/root/.ssh/authorized_keys', '/home/' + ansible_user + '/.ssh/authorized_keys') }}"
+        dest: "/home/{{ new_user }}/.ssh/authorized_keys"
+        owner: "{{ new_user }}"
+        group: "{{ new_user }}"
+        mode: "0600"
+        remote_src: true
+
+    - name: Allow new user to run sudo without password
+      copy:
+        dest: "/etc/sudoers.d/{{ new_user }}"
+        content: "{{ new_user }} ALL=(ALL) NOPASSWD:ALL"
+        owner: root
+        group: root
+        mode: "0440"
+
+    - name: Disable root login
+      lineinfile:
+        path: /etc/ssh/sshd_config
+        regexp: "{{ item.regexp }}"
+        line: "{{ item.line }}"
+        state: present
+        backrefs: yes
+      loop:
+        - { regexp: "^#?PermitRootLogin .*", line: "PermitRootLogin no" }
+        - {
+            regexp: "^#?PasswordAuthentication .*",
+            line: "PasswordAuthentication no",
+          }
+
+    - name: Ensure PasswordAuthentication is set to no in cloud-init config
+      lineinfile:
+        path: /etc/ssh/sshd_config.d/50-cloud-init.conf
+        regexp: "^PasswordAuthentication"
+        line: "PasswordAuthentication no"
+        create: yes
+        backup: yes
+
+    - name: Restart SSH
+      service:
+        name: ssh
+        state: restarted

ansible/infra/02_firewall_and_fail2ban_playbook.yml

@@ -1,56 +1,10 @@
 - name: Secure Debian VPS
   hosts: vipy
   vars_files:
-    - vars.yml
+    - ../infra_vars.yml
   become: true
 
   tasks:
-    - name: Update and upgrade apt packages
-      apt:
-        update_cache: yes
-        upgrade: full
-        autoremove: yes
-
-    - name: Create new user
-      user:
-        name: "{{ new_user }}"
-        groups: sudo
-        shell: /bin/bash
-        state: present
-        create_home: yes
-
-    - name: Set up SSH directory for new user
-      file:
-        path: "/home/{{ new_user }}/.ssh"
-        state: directory
-        mode: "0700"
-        owner: "{{ new_user }}"
-        group: "{{ new_user }}"
-
-    - name: Change SSH port and disable root login
-      lineinfile:
-        path: /etc/ssh/sshd_config
-        regexp: "{{ item.regexp }}"
-        line: "{{ item.line }}"
-        state: present
-        backrefs: yes
-      loop:
-        - { regexp: "^#?Port .*", line: "Port {{ ssh_port }}" }
-        - { regexp: "^#?PermitRootLogin .*", line: "PermitRootLogin no" }
-        - {
-            regexp: "^#?PasswordAuthentication .*",
-            line: "PasswordAuthentication no",
-          }
-
-    - name: Restart SSH
-      service:
-        name: ssh
-        state: restarted
-
-    - name: Set SSH port to new port
-      set_fact:
-        ansible_port: "{{ ssh_port }}"
-
     - name: Install UFW
       apt:
         name: ufw
@@ -68,11 +22,12 @@
     - name: Allow outgoing traffic
       ufw:
         rule: allow
-        direction: outgoing
+        direction: out
 
     - name: Allow SSH port through UFW
       ufw:
         rule: allow
+        direction: in
         port: "{{ ssh_port }}"
         proto: tcp
         from_ip: "{{ allow_ssh_from if allow_ssh_from != 'any' else omit }}"

ansible/infra/900_install_rsync.yml

@@ -0,0 +1,11 @@
+- name: Install rsync
+  hosts: all
+  vars_files:
+    - ../infra_vars.yml
+  become: true
+
+  tasks:
+    - name: Install rsync
+      apt:
+        name: rsync
+        state: present

ansible/infra/910_docker_playbook.yml

@@ -0,0 +1,79 @@
+- name: Install Docker and Docker Compose on Debian 12
+  hosts: all
+
+  become: yes
+  tasks:
+    - name: Remove old Docker-related packages
+      apt:
+        name:
+          - docker.io
+          - docker-doc
+          - docker-compose
+          - podman-docker
+          - containerd
+          - runc
+        state: absent
+        purge: yes
+        autoremove: yes
+
+    - name: Update apt cache
+      apt:
+        update_cache: yes
+
+    - name: Install prerequisites
+      apt:
+        name:
+          - ca-certificates
+          - curl
+        state: present
+
+    - name: Create directory for Docker GPG key
+      file:
+        path: /etc/apt/keyrings
+        state: directory
+        mode: '0755'
+
+    - name: Download Docker GPG key
+      get_url:
+        url: https://download.docker.com/linux/debian/gpg
+        dest: /etc/apt/keyrings/docker.asc
+        mode: '0644'
+
+    - name: Get Debian architecture
+      command: dpkg --print-architecture
+      register: deb_arch
+
+    - name: Add Docker repository
+      apt_repository:
+        repo: "deb [arch={{ deb_arch.stdout }} signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/debian {{ ansible_lsb.codename }} stable"
+        filename: docker
+        state: present
+        update_cache: yes
+
+    - name: Update apt cache
+      apt:
+        update_cache: yes
+
+    - name: Install Docker packages
+      apt:
+        name:
+          - docker-ce
+          - docker-ce-cli
+          - containerd.io
+          - docker-buildx-plugin
+          - docker-compose-plugin
+        state: present
+        update_cache: yes
+
+    - name: Ensure Docker is started and enabled
+      systemd:
+        name: docker
+        enabled: yes
+        state: started
+
+    - name: Add user to docker group
+      user:
+        name: "{{ ansible_user }}"
+        groups: docker
+        append: yes
+

ansible/infra_vars.yml

@@ -1,3 +1,4 @@
 new_user: counterweight
-ssh_port: 2222
+ssh_port: 22
 allow_ssh_from: "any"
+root_domain: contrapeso.xyz

ansible/services/caddy_playbook.yml

@@ -0,0 +1,67 @@
+- name: Install and configure Caddy on Debian 12
+  hosts: vipy
+  become: yes
+
+  tasks:
+    - name: Install required packages
+      apt:
+        name:
+          - debian-keyring
+          - debian-archive-keyring
+          - apt-transport-https
+          - curl
+        state: present
+        update_cache: yes
+
+    - name: Download Caddy GPG armored key
+      ansible.builtin.get_url:
+        url: https://dl.cloudsmith.io/public/caddy/stable/gpg.key
+        dest: /tmp/caddy-stable-archive-keyring.asc
+        mode: '0644'
+
+    - name: Convert ASCII armored key to binary keyring
+      ansible.builtin.command:
+        cmd: gpg --dearmor -o /usr/share/keyrings/caddy-stable-archive-keyring.gpg /tmp/caddy-stable-archive-keyring.asc
+      args:
+        creates: /usr/share/keyrings/caddy-stable-archive-keyring.gpg
+
+    - name: Ensure permissions on keyring file
+      ansible.builtin.file:
+        path: /usr/share/keyrings/caddy-stable-archive-keyring.gpg
+        owner: root
+        group: root
+        mode: '0644'
+
+    - name: Add Caddy repository list file
+      ansible.builtin.get_url:
+        url: https://dl.cloudsmith.io/public/caddy/stable/debian.deb.txt
+        dest: /etc/apt/sources.list.d/caddy-stable.list
+        mode: '0644'
+        validate_certs: yes
+
+    - name: Update apt cache after adding repo
+      apt:
+        update_cache: yes
+
+    - name: Install Caddy
+      apt:
+        name: caddy
+        state: present
+
+    - name: Ensure Caddy service is enabled and started
+      systemd:
+        name: caddy
+        enabled: yes
+        state: started
+
+    - name: Allow HTTP through UFW
+      ufw:
+        rule: allow
+        port: '80'
+        proto: tcp
+
+    - name: Allow HTTPS through UFW
+      ufw:
+        rule: allow
+        port: '443'
+        proto: tcp

ansible/services/forgejo/deploy_forgejo_playbook.yml

@@ -0,0 +1,94 @@
+- name: Install Forgejo on Debian 12 with Caddy reverse proxy
+  hosts: vipy
+  become: yes
+  vars:
+    forgejo_domain: "{{ forgejo_subdomain }}.{{ root_domain }}"
+
+  tasks:
+    - name: Ensure required packages are installed
+      apt:
+        name:
+          - git
+          - git-lfs
+          - wget
+        state: present
+        update_cache: true
+
+    - name: Download Forgejo binary
+      get_url:
+        url: "{{ forgejo_url }}"
+        dest: "/tmp/forgejo"
+        mode: '0755'
+
+    - name: Move Forgejo binary to /usr/local/bin
+      copy:
+        src: "/tmp/forgejo"
+        dest: "{{ forgejo_bin_path }}"
+        remote_src: yes
+        mode: '0755'
+
+    - name: Create git system user
+      user:
+        name: "{{ forgejo_user }}"
+        system: yes
+        shell: /bin/bash
+        home: "/home/{{ forgejo_user }}"
+        create_home: yes
+        comment: 'Git Version Control'
+
+    - name: Create Forgejo data directory
+      file:
+        path: "{{ forgejo_data_dir }}"
+        state: directory
+        owner: "{{ forgejo_user }}"
+        group: "{{ forgejo_user }}"
+        mode: '0750'
+
+    - name: Create Forgejo config directory
+      file:
+        path: "{{ forgejo_config_dir }}"
+        state: directory
+        owner: "root"
+        group: "{{ forgejo_user }}"
+        mode: '0770'
+
+    - name: Download Forgejo systemd service file
+      get_url:
+        url: "{{ forgejo_service_url }}"
+        dest: "/etc/systemd/system/forgejo.service"
+        mode: '0644'
+
+    - name: Reload systemd
+      systemd:
+        daemon_reload: yes
+
+    - name: Enable and start Forgejo service
+      systemd:
+        name: forgejo
+        enabled: yes
+        state: started
+
+    - name: Add Caddy reverse proxy config for Forgejo
+      copy:
+        dest: "{{ caddy_config_path }}"
+        mode: '0644'
+        content: |
+          {{ caddy_site_domain }} {
+              reverse_proxy localhost:3000
+          }
+
+    - name: Create Caddy reverse proxy configuration for uptime kuma
+      copy:
+        dest: "{{ caddy_sites_dir }}/forgejo.conf"
+        content: |
+          {{ uptime_kuma_domain }} {
+              reverse_proxy localhost:{{ uptime_kuma_port }}
+          }
+        owner: root
+        group: root
+        mode: '0644'
+
+    - name: Reload Caddy to apply new config
+      service:
+        name: caddy
+        state: reloaded

ansible/services/forgejo/forgejo_vars.yml

@@ -0,0 +1,23 @@
+# General
+forgejo_data_dir: "/var/lib/forgejo"
+forgejo_config_dir: "/etc/forgejo"
+forgejo_port: 7657
+forgejo_service_url: "https://codeberg.org/forgejo/forgejo/raw/branch/forgejo/contrib/systemd/forgejo.service"
+forgejo_version: "11.0.2"
+forgejo_arch: "linux-amd64"
+forgejo_url: "https://codeberg.org/forgejo/forgejo/releases/download/v{{ forgejo_version }}/forgejo-{{ forgejo_version }}-{{ forgejo_arch }}"
+forgejo_bin_path: "/usr/local/bin/forgejo"
+forgejo_user: "git"
+
+# Caddy
+caddy_sites_dir: /etc/caddy/sites-enabled
+forgejo_subdomain: forgejo
+
+# Remote access
+remote_host: "{{ groups['vipy'][0] }}"
+remote_user: "{{ hostvars[remote_host]['ansible_user'] }}"
+remote_key_file: "{{ hostvars[remote_host]['ansible_ssh_private_key_file'] | default('') }}"
+
+# Local backup
+local_backup_dir: "{{ lookup('env', 'HOME') }}/forgejo-backups"
+backup_script_path: "{{ lookup('env', 'HOME') }}/.local/bin/forgejo_backup.sh"

ansible/services/uptime_kuma/deploy_uptime_kuma_playbook.yml

@@ -0,0 +1,67 @@
+- name: Deploy Uptime Kuma with Docker Compose and configure Caddy reverse proxy
+  hosts: vipy
+  become: yes
+  vars_files:
+  - ../../infra_vars.yml
+  - ./uptime_kuma_vars.yml
+  vars:
+    uptime_kuma_domain: "{{ uptime_kuma_subdomain }}.{{ root_domain }}"
+
+  tasks:
+    - name: Create uptime kuma directory
+      file:
+        path: "{{ uptime_kuma_dir }}"
+        state: directory
+        owner: "{{ ansible_user }}"
+        group: "{{ ansible_user }}"
+        mode: '0755'
+
+    - name: Create docker-compose.yml for uptime kuma
+      copy:
+        dest: "{{ uptime_kuma_dir }}/docker-compose.yml"
+        content: |
+          version: "3"
+          services:
+            uptime-kuma:
+              image: louislam/uptime-kuma:latest
+              container_name: uptime-kuma
+              restart: unless-stopped
+              ports:
+                - "{{ uptime_kuma_port }}:3001"
+              volumes:
+                - ./data:/app/data
+
+    - name: Deploy uptime kuma container with docker compose
+      command: docker compose up -d
+      args:
+        chdir: "{{ uptime_kuma_dir }}"
+
+    - name: Ensure Caddy sites-enabled directory exists
+      file:
+        path: /etc/caddy/sites-enabled
+        state: directory
+        owner: root
+        group: root
+        mode: '0755'
+
+    - name: Ensure Caddyfile includes import directive for sites-enabled
+      lineinfile:
+        path: /etc/caddy/Caddyfile
+        line: 'import sites-enabled/*'
+        insertafter: EOF
+        state: present
+        backup: yes
+
+    - name: Create Caddy reverse proxy configuration for uptime kuma
+      copy:
+        dest: "{{ caddy_sites_dir }}/uptime-kuma.conf"
+        content: |
+          {{ uptime_kuma_domain }} {
+              reverse_proxy localhost:{{ uptime_kuma_port }}
+          }
+        owner: root
+        group: root
+        mode: '0644'
+
+    - name: Reload Caddy to apply new config
+      command: systemctl reload caddy

ansible/services/uptime_kuma/setup_backup_uptime_kuma_to_lapy.yml

@@ -0,0 +1,65 @@
+- name: Configure local backup for Uptime Kuma from remote
+  hosts: lapy
+  gather_facts: no
+  vars_files:
+    - ../../infra_vars.yml
+    - ./uptime_kuma_vars.yml
+  vars:
+    remote_data_path: "{{ uptime_kuma_data_dir }}"
+    local_backup_dir: "{{ lookup('env', 'HOME') }}/uptime-kuma-backups"
+    backup_script_path: "{{ lookup('env', 'HOME') }}/.local/bin/uptime_kuma_backup.sh"
+
+  tasks:
+    - name: Debug remote backup vars
+      debug:
+        msg:
+          - "remote_host={{ remote_host }}"
+          - "remote_user={{ remote_user }}"
+          - "remote_data_path='{{ remote_data_path }}'"
+          - "local_backup_dir={{ local_backup_dir }}"
+
+    - name: Ensure local backup directory exists
+      file:
+        path: "{{ local_backup_dir }}"
+        state: directory
+        mode: '0755'
+
+    - name: Ensure ~/.local/bin exists
+      file:
+        path: "{{ lookup('env', 'HOME') }}/.local/bin"
+        state: directory
+        mode: '0755'
+
+    - name: Create backup script
+      copy:
+        dest: "{{ backup_script_path }}"
+        mode: '0750'
+        content: |
+          #!/bin/bash
+          set -euo pipefail
+
+          TIMESTAMP=$(date +'%Y-%m-%d')
+          BACKUP_DIR="{{ local_backup_dir }}/$TIMESTAMP"
+          mkdir -p "$BACKUP_DIR"
+
+          {% if remote_key_file %}
+          SSH_CMD="ssh -i {{ remote_key_file }} -p {{ hostvars[remote_host]['ansible_port'] | default(22) }}"
+          {% else %}
+          SSH_CMD="ssh -p {{ hostvars[remote_host]['ansible_port'] | default(22) }}"
+          {% endif %}
+
+          rsync -az -e "$SSH_CMD" --delete {{ remote_user }}@{{ remote_host }}:{{ remote_data_path }}/ "$BACKUP_DIR/"
+
+          # Rotate old backups (keep 14 days)
+          find "{{ local_backup_dir }}" -maxdepth 1 -type d -name '20*' -mtime +13 -exec rm -rf {} \;
+
+    - name: Ensure cronjob for backup exists
+      cron:
+        name: "Uptime Kuma backup"
+        user: "{{ lookup('env', 'USER') }}"
+        job: "{{ backup_script_path }}"
+        minute: 0
+        hour: "9,12,15,18"
+
+    - name: Run the backup script to make the first backup
+      command: "{{ backup_script_path }}"

ansible/services/uptime_kuma/uptime_kuma_vars.yml

@@ -0,0 +1,17 @@
+# General
+uptime_kuma_dir: /opt/uptime-kuma
+uptime_kuma_data_dir: "{{ uptime_kuma_dir }}/data"
+uptime_kuma_port: 3001
+
+# Caddy
+caddy_sites_dir: /etc/caddy/sites-enabled
+uptime_kuma_subdomain: uptime
+
+# Remote access
+remote_host: "{{ groups['vipy'][0] }}"
+remote_user: "{{ hostvars[remote_host]['ansible_user'] }}"
+remote_key_file: "{{ hostvars[remote_host]['ansible_ssh_private_key_file'] | default('') }}"
+
+# Local backup
+local_backup_dir: "{{ lookup('env', 'HOME') }}/uptime-kuma-backups"
+backup_script_path: "{{ lookup('env', 'HOME') }}/.local/bin/uptime_kuma_backup.sh"

ansible/services/vaultwarden/deploy_vaultwarden_playbook.yml

@@ -0,0 +1,108 @@
+- name: Deploy Vaultwarden with Docker Compose and configure Caddy reverse proxy
+  hosts: vipy
+  become: yes
+  vars_files:
+    - ../../infra_vars.yml
+    - ./vaultwarden_vars.yml
+  vars:
+    vaultwarden_domain: "{{ vaultwarden_subdomain }}.{{ root_domain }}"
+
+  tasks:
+    - name: Create vaultwarden directory
+      file:
+        path: "{{ vaultwarden_dir }}"
+        state: directory
+        owner: "{{ ansible_user }}"
+        group: "{{ ansible_user }}"
+        mode: '0755'
+
+    - name: Create docker-compose.yml for vaultwarden
+      copy:
+        dest: "{{ vaultwarden_dir }}/docker-compose.yml"
+        content: |
+          version: "3"
+          services:
+            vaultwarden:
+              image: vaultwarden/server:latest
+              container_name: vaultwarden
+              restart: unless-stopped
+              ports:
+                - "{{ vaultwarden_port }}:80"
+              volumes:
+                - ./data:/data
+              environment:
+                WEBSOCKET_ENABLED: 'true'
+                DOMAIN: "https://{{ vaultwarden_domain }}"
+                SIGNUPS_ALLOWED: 'true'
+                LOG_FILE: /data/vaultwarden.log
+
+    - name: Deploy vaultwarden container with docker compose
+      command: docker compose up -d
+      args:
+        chdir: "{{ vaultwarden_dir }}"
+
+    - name: Create Fail2Ban filter for Vaultwarden
+      copy:
+        dest: /etc/fail2ban/filter.d/vaultwarden.local
+        owner: root
+        group: root
+        mode: '0644'
+        content: |
+          [INCLUDES]
+          before = common.conf
+
+          [Definition]
+          failregex = ^.*?Username or password is incorrect\. Try again\. IP: <ADDR>\. Username:.*$
+          ignoreregex =
+
+    - name: Create Fail2Ban jail for Vaultwarden
+      copy:
+        dest: /etc/fail2ban/jail.d/vaultwarden.local
+        owner: root
+        group: root
+        mode: '0644'
+        content: |
+          [vaultwarden]
+          enabled = true
+          port = http,https
+          filter = vaultwarden
+          logpath = {{ vaultwarden_data_dir }}/vaultwarden.log
+          maxretry = 10
+          findtime = 10m
+          bantime = 1h
+
+    - name: Restart fail2ban to apply changes
+      systemd:
+        name: fail2ban
+        state: restarted
+
+    - name: Ensure Caddy sites-enabled directory exists
+      file:
+        path: "{{ caddy_sites_dir }}"
+        state: directory
+        owner: root
+        group: root
+        mode: '0755'
+
+    - name: Ensure Caddyfile includes import directive for sites-enabled
+      lineinfile:
+        path: /etc/caddy/Caddyfile
+        line: 'import sites-enabled/*'
+        insertafter: EOF
+        state: present
+        backup: yes
+
+    - name: Create Caddy reverse proxy configuration for vaultwarden
+      copy:
+        dest: "{{ caddy_sites_dir }}/vaultwarden.conf"
+        content: |
+          {{ vaultwarden_domain }} {
+              reverse_proxy localhost:{{ vaultwarden_port }}
+          }
+        owner: root
+        group: root
+        mode: '0644'
+
+    - name: Reload Caddy to apply new config
+      command: systemctl reload caddy
+

ansible/services/vaultwarden/disable_vaultwarden_sign_ups_playbook.yml

@@ -0,0 +1,18 @@
+- name: Disable Vaultwarden Signups
+  hosts: vipy
+  become: yes
+  vars_files:
+    - ../../infra_vars.yml
+    - ./vaultwarden_vars.yml
+
+  tasks:
+    - name: Disable signups in docker-compose.yml
+      replace:
+        path: "{{ vaultwarden_dir }}/docker-compose.yml"
+        regexp: 'SIGNUPS_ALLOWED:.*'
+        replace: "SIGNUPS_ALLOWED: 'false'"
+
+    - name: Re-deploy Vaultwarden with signups disabled
+      command: docker compose up -d
+      args:
+        chdir: "{{ vaultwarden_dir }}"

ansible/services/vaultwarden/setup_backup_vaultwarden_to_lapy.yml

@@ -0,0 +1,63 @@
+- name: Configure local backup for Vaultwarden from remote
+  hosts: lapy
+  gather_facts: no
+  vars_files:
+    - ../../infra_vars.yml
+    - ./vaultwarden_vars.yml
+  vars:
+    remote_data_path: "{{ vaultwarden_data_dir }}"
+
+  tasks:
+    - name: Debug remote backup vars
+      debug:
+        msg:
+          - "remote_host={{ remote_host }}"
+          - "remote_user={{ remote_user }}"
+          - "remote_data_path='{{ remote_data_path }}'"
+          - "local_backup_dir={{ local_backup_dir }}"
+
+    - name: Ensure local backup directory exists
+      file:
+        path: "{{ local_backup_dir }}"
+        state: directory
+        mode: '0755'
+
+    - name: Ensure ~/.local/bin exists
+      file:
+        path: "{{ lookup('env', 'HOME') }}/.local/bin"
+        state: directory
+        mode: '0755'
+
+    - name: Create backup script
+      copy:
+        dest: "{{ backup_script_path }}"
+        mode: '0750'
+        content: |
+          #!/bin/bash
+          set -euo pipefail
+
+          TIMESTAMP=$(date +'%Y-%m-%d')
+          BACKUP_DIR="{{ local_backup_dir }}/$TIMESTAMP"
+          mkdir -p "$BACKUP_DIR"
+
+          {% if remote_key_file %}
+          SSH_CMD="ssh -i {{ remote_key_file }} -p {{ hostvars[remote_host]['ansible_port'] | default(22) }}"
+          {% else %}
+          SSH_CMD="ssh -p {{ hostvars[remote_host]['ansible_port'] | default(22) }}"
+          {% endif %}
+
+          rsync -az -e "$SSH_CMD" --delete {{ remote_user }}@{{ remote_host }}:{{ remote_data_path }}/ "$BACKUP_DIR/"
+
+          # Rotate old backups (keep 14 days)
+          find "{{ local_backup_dir }}" -maxdepth 1 -type d -name '20*' -mtime +13 -exec rm -rf {} \;
+
+    - name: Ensure cronjob for backup exists
+      cron:
+        name: "Vaultwarden backup"
+        user: "{{ lookup('env', 'USER') }}"
+        job: "{{ backup_script_path }}"
+        minute: 5
+        hour: "9,12,15,18"
+
+    - name: Run the backup script to make the first backup
+      command: "{{ backup_script_path }}"

ansible/services/vaultwarden/vaultwarden_vars.yml

@@ -0,0 +1,17 @@
+# General
+vaultwarden_dir: /opt/vaultwarden
+vaultwarden_data_dir: "{{ vaultwarden_dir }}/data"
+vaultwarden_port: 8222
+
+# Caddy
+caddy_sites_dir: /etc/caddy/sites-enabled
+vaultwarden_subdomain: vault
+
+# Remote access
+remote_host: "{{ groups['vipy'][0] }}"
+remote_user: "{{ hostvars[remote_host]['ansible_user'] }}"
+remote_key_file: "{{ hostvars[remote_host]['ansible_ssh_private_key_file'] | default('') }}"
+
+# Local backup
+local_backup_dir: "{{ lookup('env', 'HOME') }}/vaultwarden-backups"
+backup_script_path: "{{ lookup('env', 'HOME') }}/.local/bin/vaultwarden_backup.sh"

infra/example.inventory.ini

@@ -1,2 +0,0 @@
-[vipy]
-your.vps.ip.here ansible_user=debian ansible_port=22

requirements.txt

@@ -0,0 +1,10 @@
+ansible==10.7.0
+ansible-core==2.17.12
+cffi==1.17.1
+cryptography==45.0.4
+Jinja2==3.1.6
+MarkupSafe==3.0.2
+packaging==25.0
+pycparser==2.22
+PyYAML==6.0.2
+resolvelib==1.0.1