counterweight/personal_infra
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions

fulcrum: convert to a role, de-Uptime-Kuma the health check

Browse source 
685-line playbook becomes 33 lines plus a 426-line role
(install/service/healthcheck phases, six templates, one handler).
fulcrum_vars.yml is deleted; its content is the role's defaults.

Verified: fulcrum untouched - active since 2026-07-29 (no restart), 192G datadir,
height 966842, bitcoind and db_mem unchanged on disk. Second run changed=1 (the
arming run, changed_when: false aside). vipy changed=0.

THREE PRE-EXISTING LANDMINES the check-mode diff caught, any of which a faithful
extraction would have detonated:

- bitcoin_rpc_host was "192.168.1.140", commented "IP of knots_box_local". But
  .140 is fulcrum-box ITSELF; knots-box is .135. The DHCP leases had reshuffled -
  the fifth instance of this same disease in this estate. The live config had
  been hand-corrected to knots-box; running the playbook would have reverted it
  and pointed Fulcrum at itself. Now addressed by Tailscale name.

- The `Restart fulcrum` handler was guarded by uptime_kuma_enabled, so the three
  tasks that notify it (SSL cert, fulcrum.conf, systemd unit) could not restart
  anything. A config change applied to disk, reported success, and silently never
  took effect. That is worse than the other banner casualties: it makes the
  deployment itself lie. Ungated.

- db_mem was about to go 2048 -> 4448 (75% of 5931MB RAM), leaving ~1.4GB for the
  OS and Fulcrum's non-cache memory. The live value had been hand-tuned down.
  fulcrum_db_mem_mb_override pins it. Note set_fact outranks role defaults, so
  the calculation itself has to honour the override.

MY OWN ERROR, third instance: retyping `copy:` as `template:` lost `owner:` on
the banner and on fulcrum.conf. Rather than keep catching these by eye, every
managed path's owner/group/mode is now compared against `git show HEAD:`
mechanically - 12/12 match.

The health check timer had not fired since 2026-02-17 while reporting `active`
and `enabled`. It is OnBootSec + OnUnitActiveSec with no OnCalendar: OnBootSec
elapses once, and OnUnitActiveSec needs the SERVICE to have run this boot to have
anything to schedule from. Restarting the timer does not supply that; running the
service does, so the role now runs the check once after enabling. Also dropped
`Requires=fulcrum.service` from the timer - on a timer that means "stop watching
when the watched thing stops".

Diagnostic note: NextElapseUSecRealtime is always empty for a monotonic timer, so
it reads as broken even when healthy. I misread it once and wrongly called the
timer dead. Use NextElapseUSecMonotonic or systemctl list-timers.

fulcrum_ssl_port and fulcrum_tailscale_hostname moved to services_config.yml -
the socket-proxy play on the edge host needs them and a role default cannot reach
a second play.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This commit is contained in:
counterweight 2026-09-13 18:02:00 +02:00
parent 356139290f
commit e83191c029
Signed by: counterweight
GPG key ID: 883EDBAA726BD96C
15 changed files with 516 additions and 666 deletions
Download patch file Download diff file Expand all files Collapse all files

674
ansible/services/fulcrum/deploy_fulcrum_playbook.yml
View file

@ -1,3 +1,7 @@
---
# Fulcrum: Electrum server indexing the Bitcoin Knots node.
# The index takes days to rebuild, so nothing here touches its data directory
# beyond asserting that it exists.
- name: Deploy Fulcrum Electrum Server
hosts: electrum
become: yes
@ -5,540 +9,12 @@
- ../../infra_vars.yml
- ../../services_config.yml
- ../../infra_secrets.yml
- ./fulcrum_vars.yml
vars:
uptime_kuma_api_url: "https://{{ subdomains.uptime_kuma }}.{{ root_domain }}"
tasks:
- name: Calculate 75% of system RAM for db_mem
set_fact:
fulcrum_db_mem_mb: "{{ (ansible_memtotal_mb | float * fulcrum_db_mem_percent) | int }}"
changed_when: false
- name: Display calculated db_mem value
debug:
msg: "Setting db_mem to {{ fulcrum_db_mem_mb }} MB ({{ (fulcrum_db_mem_percent * 100) | int }}% of {{ ansible_memtotal_mb }} MB total RAM)"
- name: Display Fulcrum version to install
debug:
msg: "Installing Fulcrum version {{ fulcrum_version }}"
- name: Install required packages
apt:
name:
- curl
- wget
- openssl
state: present
update_cache: yes
- name: Create fulcrum group
group:
name: "{{ fulcrum_group }}"
system: yes
state: present
- name: Create fulcrum user
user:
name: "{{ fulcrum_user }}"
group: "{{ fulcrum_group }}"
system: yes
shell: /usr/sbin/nologin
home: /home/{{ fulcrum_user }}
create_home: yes
state: present
- name: Create Fulcrum database directory (heavy data on special mount)
file:
path: "{{ fulcrum_db_dir }}"
state: directory
owner: "{{ fulcrum_user }}"
group: "{{ fulcrum_group }}"
mode: '0755'
- name: Create Fulcrum config directory
file:
path: "{{ fulcrum_config_dir }}"
state: directory
owner: root
group: "{{ fulcrum_group }}"
mode: '0755'
- name: Create Fulcrum lib directory (for banner and other data files)
file:
path: "{{ fulcrum_lib_dir }}"
state: directory
owner: "{{ fulcrum_user }}"
group: "{{ fulcrum_group }}"
mode: '0755'
# ===========================================
# SSL Certificate Generation
# ===========================================
- name: Check if SSL certificate already exists
stat:
path: "{{ fulcrum_ssl_cert_path }}"
register: fulcrum_ssl_cert_exists
when: fulcrum_ssl_enabled | default(false)
- name: Generate self-signed SSL certificate for Fulcrum
command: >
openssl req -x509 -newkey rsa:4096
-keyout {{ fulcrum_ssl_key_path }}
-out {{ fulcrum_ssl_cert_path }}
-sha256 -days {{ fulcrum_ssl_cert_days }}
-nodes
-subj "/C=XX/ST=Decentralized/L=Bitcoin/O=Fulcrum/OU=Electrum/CN=fulcrum.local"
args:
creates: "{{ fulcrum_ssl_cert_path }}"
when: fulcrum_ssl_enabled | default(false)
notify: Restart fulcrum
- name: Set SSL certificate permissions
file:
path: "{{ fulcrum_ssl_cert_path }}"
owner: "{{ fulcrum_user }}"
group: "{{ fulcrum_group }}"
mode: '0644'
when: fulcrum_ssl_enabled | default(false) and fulcrum_ssl_cert_exists.stat.exists | default(false) or fulcrum_ssl_enabled | default(false)
- name: Set SSL key permissions
file:
path: "{{ fulcrum_ssl_key_path }}"
owner: "{{ fulcrum_user }}"
group: "{{ fulcrum_group }}"
mode: '0600'
when: fulcrum_ssl_enabled | default(false)
- name: Check if Fulcrum binary already exists
stat:
path: "{{ fulcrum_binary_path }}"
register: fulcrum_binary_exists
changed_when: false
- name: Download Fulcrum binary tarball
get_url:
url: "https://github.com/cculianu/Fulcrum/releases/download/v{{ fulcrum_version }}/Fulcrum-{{ fulcrum_version }}-x86_64-linux.tar.gz"
dest: "/tmp/Fulcrum-{{ fulcrum_version }}-x86_64-linux.tar.gz"
mode: '0644'
when: not fulcrum_binary_exists.stat.exists
- name: Extract Fulcrum binary
unarchive:
src: "/tmp/Fulcrum-{{ fulcrum_version }}-x86_64-linux.tar.gz"
dest: "/tmp"
remote_src: yes
when: not fulcrum_binary_exists.stat.exists
- name: Install Fulcrum binary
copy:
src: "/tmp/Fulcrum-{{ fulcrum_version }}-x86_64-linux/Fulcrum"
dest: "{{ fulcrum_binary_path }}"
owner: root
group: root
mode: '0755'
remote_src: yes
when: not fulcrum_binary_exists.stat.exists
- name: Verify Fulcrum binary installation
command: "{{ fulcrum_binary_path }} --version"
register: fulcrum_version_check
changed_when: false
- name: Display Fulcrum version
debug:
msg: "{{ fulcrum_version_check.stdout_lines }}"
- name: Create Fulcrum banner file
copy:
dest: "{{ fulcrum_lib_dir }}/fulcrum-banner.txt"
content: |
counterinfra
PER ASPERA AD ASTRA
owner: "{{ fulcrum_user }}"
group: "{{ fulcrum_group }}"
mode: '0644'
- name: Create Fulcrum configuration file
copy:
dest: "{{ fulcrum_config_dir }}/fulcrum.conf"
content: |
# Fulcrum Configuration
# Generated by Ansible
# Bitcoin Core/Knots RPC settings
bitcoind = {{ bitcoin_rpc_host }}:{{ bitcoin_rpc_port }}
rpcuser = {{ bitcoin_rpc_user }}
rpcpassword = {{ bitcoin_rpc_password }}
# Fulcrum server general settings
datadir = {{ fulcrum_db_dir }}
tcp = {{ fulcrum_tcp_bind }}:{{ fulcrum_tcp_port }}
peering = {{ 'true' if fulcrum_peering else 'false' }}
zmq_allow_hashtx = {{ 'true' if fulcrum_zmq_allow_hashtx else 'false' }}
# SSL/TLS Configuration
{% if fulcrum_ssl_enabled | default(false) %}
ssl = {{ fulcrum_ssl_bind }}:{{ fulcrum_ssl_port }}
cert = {{ fulcrum_ssl_cert_path }}
key = {{ fulcrum_ssl_key_path }}
{% endif %}
# Anonymize client IP addresses and TxIDs in logs
anon_logs = {{ 'true' if fulcrum_anon_logs else 'false' }}
# Max RocksDB Memory in MiB
db_mem = {{ fulcrum_db_mem_mb }}.0
# Banner
banner = {{ fulcrum_lib_dir }}/fulcrum-banner.txt
owner: "{{ fulcrum_user }}"
group: "{{ fulcrum_group }}"
mode: '0640'
notify: Restart fulcrum
- name: Create systemd service file for Fulcrum
copy:
dest: /etc/systemd/system/fulcrum.service
content: |
# MiniBolt: systemd unit for Fulcrum
# /etc/systemd/system/fulcrum.service
[Unit]
Description=Fulcrum
After=network.target
StartLimitBurst=2
StartLimitIntervalSec=20
[Service]
ExecStart={{ fulcrum_binary_path }} {{ fulcrum_config_dir }}/fulcrum.conf
User={{ fulcrum_user }}
Group={{ fulcrum_group }}
# Process management
####################
Type=simple
KillSignal=SIGINT
TimeoutStopSec=300
[Install]
WantedBy=multi-user.target
owner: root
group: root
mode: '0644'
notify: Restart fulcrum
- name: Reload systemd daemon
systemd:
daemon_reload: yes
- name: Enable and start Fulcrum service
systemd:
name: fulcrum
enabled: yes
state: started
- name: Wait for Fulcrum to start
wait_for:
port: "{{ fulcrum_tcp_port }}"
host: "{{ fulcrum_tcp_bind }}"
delay: 5
timeout: 30
ignore_errors: yes
- name: Check Fulcrum service status
systemd:
name: fulcrum
register: fulcrum_service_status
changed_when: false
- name: Display Fulcrum service status
debug:
msg: "Fulcrum service is {{ 'running' if fulcrum_service_status.status.ActiveState == 'active' else 'not running' }}"
# ═════════════════════════════════════════════════════════════════════════
# DEPRECATED — Uptime Kuma was decommissioned on 2026-09-11.
#
# Every task below is inert: uptime_kuma_enabled is false in
# group_vars/all/main.yml, so they all skip and the deployment above still
# runs normally. Kept because the health-check logic is the durable part —
# when a replacement exists, rewire the push transport and flip the flag.
#
# What was being monitored: archive/uptime_kuma/MONITORS.md
# ═════════════════════════════════════════════════════════════════════════
- name: Create Fulcrum health check and push script
when: uptime_kuma_enabled | default(false)
copy:
dest: /usr/local/bin/fulcrum-healthcheck-push.sh
content: |
#!/bin/bash
#
# Fulcrum Health Check and Push to Uptime Kuma
# Checks if Fulcrum TCP port is responding and pushes status to Uptime Kuma
#
FULCRUM_HOST="{{ fulcrum_tcp_bind }}"
FULCRUM_PORT={{ fulcrum_tcp_port }}
UPTIME_KUMA_PUSH_URL="${UPTIME_KUMA_PUSH_URL}"
# Check if Fulcrum TCP port is responding
check_fulcrum() {
# Try to connect to TCP port
timeout 5 bash -c "echo > /dev/tcp/${FULCRUM_HOST}/${FULCRUM_PORT}" 2>/dev/null
return $?
}
# Push status to Uptime Kuma
push_to_uptime_kuma() {
local status=$1
local msg=$2
if [ -z "$UPTIME_KUMA_PUSH_URL" ]; then
echo "ERROR: UPTIME_KUMA_PUSH_URL not set"
return 1
fi
# URL encode spaces in message
local encoded_msg="${msg// /%20}"
if ! curl -s --max-time 10 --retry 2 -o /dev/null \
"${UPTIME_KUMA_PUSH_URL}?status=${status}&msg=${encoded_msg}&ping="; then
echo "ERROR: Failed to push to Uptime Kuma"
return 1
fi
}
# Main health check
if check_fulcrum; then
push_to_uptime_kuma "up" "OK"
exit 0
else
push_to_uptime_kuma "down" "Fulcrum TCP port not responding"
exit 1
fi
owner: root
group: root
mode: '0755'
- name: Create systemd timer for Fulcrum health check
copy:
dest: /etc/systemd/system/fulcrum-healthcheck.timer
content: |
[Unit]
Description=Fulcrum Health Check Timer
Requires=fulcrum.service
[Timer]
OnBootSec=1min
OnUnitActiveSec=1min
Persistent=true
[Install]
WantedBy=timers.target
owner: root
group: root
mode: '0644'
- name: Create systemd service for Fulcrum health check
when: uptime_kuma_enabled | default(false)
copy:
dest: /etc/systemd/system/fulcrum-healthcheck.service
content: |
[Unit]
Description=Fulcrum Health Check and Push to Uptime Kuma
After=network.target fulcrum.service
[Service]
Type=oneshot
User=root
ExecStart=/usr/local/bin/fulcrum-healthcheck-push.sh
Environment=UPTIME_KUMA_PUSH_URL=
StandardOutput=journal
StandardError=journal
[Install]
WantedBy=multi-user.target
owner: root
group: root
mode: '0644'
- name: Reload systemd daemon for health check
systemd:
daemon_reload: yes
- name: Enable and start Fulcrum health check timer
systemd:
name: fulcrum-healthcheck.timer
enabled: yes
state: started
- name: Create Uptime Kuma push monitor setup script for Fulcrum
when: uptime_kuma_enabled | default(false)
delegate_to: localhost
become: no
copy:
dest: /tmp/setup_fulcrum_monitor.py
content: |
#!/usr/bin/env python3
import sys
import traceback
import yaml
from uptime_kuma_api import UptimeKumaApi, MonitorType
try:
# Load configs
with open('/tmp/ansible_config.yml', 'r') as f:
config = yaml.safe_load(f)
url = config['uptime_kuma_url']
username = config['username']
password = config['password']
monitor_name = config['monitor_name']
# Connect to Uptime Kuma
api = UptimeKumaApi(url, timeout=30)
api.login(username, password)
# Get all monitors
monitors = api.get_monitors()
# Find or create "services" group
group = next((m for m in monitors if m.get('name') == 'services' and m.get('type') == 'group'), None)
if not group:
group_result = api.add_monitor(type='group', name='services')
# Refresh to get the group with id
monitors = api.get_monitors()
group = next((m for m in monitors if m.get('name') == 'services' and m.get('type') == 'group'), None)
# Check if monitor already exists
existing_monitor = None
for monitor in monitors:
if monitor.get('name') == monitor_name:
existing_monitor = monitor
break
# Get ntfy notification ID
notifications = api.get_notifications()
ntfy_notification_id = None
for notif in notifications:
if notif.get('type') == 'ntfy':
ntfy_notification_id = notif.get('id')
break
if existing_monitor:
print(f"Monitor '{monitor_name}' already exists (ID: {existing_monitor['id']})")
push_token = existing_monitor.get('pushToken') or existing_monitor.get('push_token')
if not push_token:
raise ValueError("Could not find push token for monitor")
push_url = f"{url}/api/push/{push_token}"
print(f"Push URL: {push_url}")
else:
print(f"Creating push monitor '{monitor_name}'...")
api.add_monitor(
type=MonitorType.PUSH,
name=monitor_name,
parent=group['id'],
interval=60,
maxretries=3,
retryInterval=60,
notificationIDList={ntfy_notification_id: True} if ntfy_notification_id else {}
)
monitors = api.get_monitors()
new_monitor = next((m for m in monitors if m.get('name') == monitor_name), None)
if new_monitor:
push_token = new_monitor.get('pushToken') or new_monitor.get('push_token')
if not push_token:
raise ValueError("Could not find push token for new monitor")
push_url = f"{url}/api/push/{push_token}"
print(f"Push URL: {push_url}")
api.disconnect()
print("SUCCESS")
except Exception as e:
error_msg = str(e) if str(e) else repr(e)
print(f"ERROR: {error_msg}", file=sys.stderr)
traceback.print_exc(file=sys.stderr)
sys.exit(1)
mode: '0755'
- name: Create temporary config for monitor setup
when: uptime_kuma_enabled | default(false)
delegate_to: localhost
become: no
copy:
dest: /tmp/ansible_config.yml
content: |
uptime_kuma_url: "{{ uptime_kuma_api_url }}"
username: "{{ uptime_kuma_username }}"
password: "{{ uptime_kuma_password }}"
monitor_name: "Fulcrum"
mode: '0644'
- name: Run Uptime Kuma push monitor setup
when: uptime_kuma_enabled | default(false)
command: python3 /tmp/setup_fulcrum_monitor.py
delegate_to: localhost
become: no
register: monitor_setup
changed_when: "'SUCCESS' in monitor_setup.stdout"
ignore_errors: yes
- name: Extract push URL from monitor setup output
set_fact:
uptime_kuma_push_url: "{{ monitor_setup.stdout | regex_search('Push URL: (https?://[^\\s]+)', '\\1') | first | default('') }}"
delegate_to: localhost
become: no
when: monitor_setup.stdout is defined
- name: Display extracted push URL
debug:
msg: "Uptime Kuma Push URL: {{ uptime_kuma_push_url }}"
when: uptime_kuma_push_url | default('') != ''
- name: Set push URL in systemd service environment
lineinfile:
path: /etc/systemd/system/fulcrum-healthcheck.service
regexp: '^Environment=UPTIME_KUMA_PUSH_URL='
line: "Environment=UPTIME_KUMA_PUSH_URL={{ uptime_kuma_push_url }}"
state: present
insertafter: '^\[Service\]'
when: uptime_kuma_push_url | default('') != ''
- name: Reload systemd daemon after push URL update
systemd:
daemon_reload: yes
when: uptime_kuma_push_url | default('') != ''
- name: Restart health check timer to pick up new environment
systemd:
name: fulcrum-healthcheck.timer
state: restarted
when: uptime_kuma_push_url | default('') != ''
- name: Clean up temporary files
when: uptime_kuma_enabled | default(false)
delegate_to: localhost
become: no
file:
path: "{{ item }}"
state: absent
loop:
- /tmp/setup_fulcrum_monitor.py
- /tmp/ansible_config.yml
- /tmp/Fulcrum-{{ fulcrum_version }}-x86_64-linux.tar.gz
- /tmp/Fulcrum-{{ fulcrum_version }}-x86_64-linux
handlers:
- name: Restart fulcrum
when: uptime_kuma_enabled | default(false)
systemd:
name: fulcrum
state: restarted
# Preserves the push URL this check has been configured with. The role knows
# nothing about Uptime Kuma — this is just "a URL that accepts a ping".
healthcheck_push_url: "{{ healthcheck_push_urls.fulcrum | default('') }}"
roles:
- fulcrum
- name: Setup public Fulcrum SSL forwarding on the edge host
hosts: edge
@ -546,11 +22,6 @@
vars_files:
- ../../infra_vars.yml
- ../../services_config.yml
- ../../infra_secrets.yml
- ./fulcrum_vars.yml
vars:
uptime_kuma_api_url: "https://{{ subdomains.uptime_kuma }}.{{ root_domain }}"
tasks:
- name: Expose Fulcrum SSL through a socket proxy
ansible.builtin.include_role:
@ -558,128 +29,5 @@
vars:
socket_proxy_name: fulcrum-ssl
socket_proxy_description: "Fulcrum SSL"
socket_proxy_listen_port: "{{ fulcrum_ssl_port }}"
socket_proxy_upstream_host: "{{ fulcrum_tailscale_hostname }}"
- name: Display public endpoint
when: uptime_kuma_enabled | default(false)
debug:
msg: "Fulcrum SSL public endpoint: {{ ansible_host }}:{{ fulcrum_ssl_port }}"
# ===========================================
# Uptime Kuma TCP Monitor for Public SSL Port
# ===========================================
- name: Create Uptime Kuma TCP monitor setup script for Fulcrum SSL
when: uptime_kuma_enabled | default(false)
delegate_to: localhost
become: no
copy:
dest: /tmp/setup_fulcrum_ssl_tcp_monitor.py
content: |
#!/usr/bin/env python3
import sys
import traceback
import yaml
from uptime_kuma_api import UptimeKumaApi, MonitorType
try:
with open('/tmp/ansible_fulcrum_ssl_config.yml', 'r') as f:
config = yaml.safe_load(f)
url = config['uptime_kuma_url']
username = config['username']
password = config['password']
monitor_host = config['monitor_host']
monitor_port = config['monitor_port']
monitor_name = config['monitor_name']
api = UptimeKumaApi(url, timeout=30)
api.login(username, password)
monitors = api.get_monitors()
# Find or create "services" group
group = next((m for m in monitors if m.get('name') == 'services' and m.get('type') == 'group'), None)
if not group:
api.add_monitor(type='group', name='services')
monitors = api.get_monitors()
group = next((m for m in monitors if m.get('name') == 'services' and m.get('type') == 'group'), None)
# Check if monitor already exists
existing = next((m for m in monitors if m.get('name') == monitor_name), None)
# Get ntfy notification ID
notifications = api.get_notifications()
ntfy_notification_id = None
for notif in notifications:
if notif.get('type') == 'ntfy':
ntfy_notification_id = notif.get('id')
break
if existing:
print(f"Monitor '{monitor_name}' already exists (ID: {existing['id']})")
print("Skipping - monitor already configured")
else:
print(f"Creating TCP monitor '{monitor_name}'...")
api.add_monitor(
type=MonitorType.PORT,
name=monitor_name,
hostname=monitor_host,
port=monitor_port,
parent=group['id'],
interval=60,
maxretries=3,
retryInterval=60,
notificationIDList={ntfy_notification_id: True} if ntfy_notification_id else {}
)
api.disconnect()
print("SUCCESS")
except Exception as e:
print(f"ERROR: {str(e)}", file=sys.stderr)
traceback.print_exc(file=sys.stderr)
sys.exit(1)
mode: '0755'
- name: Create temporary config for TCP monitor setup
when: uptime_kuma_enabled | default(false)
delegate_to: localhost
become: no
copy:
dest: /tmp/ansible_fulcrum_ssl_config.yml
content: |
uptime_kuma_url: "{{ uptime_kuma_api_url }}"
username: "{{ uptime_kuma_username }}"
password: "{{ uptime_kuma_password }}"
monitor_host: "{{ ansible_host }}"
monitor_port: {{ fulcrum_ssl_port }}
monitor_name: "Fulcrum SSL Public"
mode: '0644'
- name: Run Uptime Kuma TCP monitor setup
when: uptime_kuma_enabled | default(false)
command: python3 /tmp/setup_fulcrum_ssl_tcp_monitor.py
delegate_to: localhost
become: no
register: tcp_monitor_setup
changed_when: "'SUCCESS' in tcp_monitor_setup.stdout"
ignore_errors: yes
- name: Display TCP monitor setup output
debug:
msg: "{{ tcp_monitor_setup.stdout_lines }}"
when: tcp_monitor_setup.stdout is defined
- name: Clean up TCP monitor temporary files
when: uptime_kuma_enabled | default(false)
delegate_to: localhost
become: no
file:
path: "{{ item }}"
state: absent
loop:
- /tmp/setup_fulcrum_ssl_tcp_monitor.py
- /tmp/ansible_fulcrum_ssl_config.yml
socket_proxy_listen_port: "{{ service_settings.fulcrum.ssl_port }}"
socket_proxy_upstream_host: "{{ service_settings.fulcrum.tailscale_hostname }}"