xmrblocks: the Monero explorer, built off-box because 2 GB cannot compile it

The Onion Monero Blockchain Explorer on monerod-box, published at
exmrplore.contrapeso.xyz. Ten Gatus endpoints green across the node and the
explorer.

── It needs a compiled monero source tree, not a running monerod ───────────
xmrblocks is not an RPC client. cmake/FindMonero.cmake imports 21 STATIC
libraries out of a monero build tree and includes its headers, because it opens
the LMDB directly. The release tarball we install for the daemon ships only
executables - no .a files, no headers - so there is nothing on the box to link
against, and building it means compiling monero first.

Measured on Debian 13, building only the libraries it links:

    peak RSS, one cc1plus      ~3.2 GB
    peak RSS at -j4            ~5.5 GB
    wall time at -j4           167 s
    source + build tree        195 MB
    toolchain                  1.6 GB

That rules the box out at ANY parallelism: 768 MiB and 1800 MiB were both
OOM-killed at -j1 and -j2, because a single translation unit over 3 GB is not
something lower -j works around. My first estimate of "~10 GB of disk" was
wrong by two orders of magnitude - that figure describes upstream's full `make`,
which also builds monerod, both wallets and the test suite, none of it linked
here. Disk was never the constraint.

So scripts/build-xmrblocks.sh does the build in a debian:13 container. An
artefact only one machine can produce is one nobody can audit; this way any host
with Docker and ~6 GB reproduces it. It verifies the monero source against
binaryFate's signature exactly as roles/monero does for the daemon, and the role
asserts the resulting sha256 ON THE CONTROL NODE before copying a single byte.

── Three upstream problems, none documented anywhere ───────────────────────
Found by building, not by reading:

  1. libasio-dev is absent from upstream's dependency list. That list is
     Ubuntu-based; Crow wants standalone asio.hpp, not boost/asio.hpp, and on
     Debian 13 the build dies outright.

  2. The explorer does not compile against monero v0.18.5.1. v0.18.5.0 changed
     get_pruned_transaction_hash from returning the hash to returning bool with
     an out-param, and src/page.h still calls the old form. Upstream's
     Dockerfile pins v0.18.4.0, which is why nobody has hit it. Patched from an
     exact-line anchor, so if upstream fixes it the build STOPS rather than
     quietly doing something else. We patch instead of building against 0.18.4.0
     because the signed hashes.txt only covers the current release - using the
     older source would mean dropping the provenance chain. LMDB is VERSION 5 in
     both, so either reads the other's database.

  3. FindMonero.cmake hunts for miniupnpc inside the monero build tree with
     NO_DEFAULT_PATH, but monero stopped vendoring miniupnp as a submodule.
     Fixed with a cache override rather than patching their cmake.

USE_DEVICE_TREZOR=OFF as well - an explorer has no use for hardware wallets and
it drops the generated protobuf units. Verified that xmrblocks still links.

── Two things in the unit that look wrong and are not ──────────────────────
WorkingDirectory is load-bearing: page.h hardcodes TMPL_DIR as "./templates",
resolved relative to cwd at REQUEST time. Get it wrong and the service starts,
binds 8081, and 500s every page. That is also why the health check fetches a
real page and greps it instead of probing the port.

ReadWritePaths must include the blockchain directory even though the database is
opened read-only: monero sets mdb_flags = MDB_RDONLY WITHOUT MDB_NOLOCK, so
LMDB still registers this reader in lock.mdb. With ProtectSystem=strict and
nothing writable the open fails. "It only reads, so grant it nothing" is wrong.

── Timeouts are measured, not guessed ──────────────────────────────────────
proxmox-tank-1 is a spinning-disk mirror and xmrblocks says so on startup.
First start took 98s to open the LMDB before binding (wait_for now allows 300s),
and a COLD index page took 68 SECONDS where the next two took 0.87s and 0.012s
(the check now allows 90s, its unit 180s). The first pass used 90s and 25s and
produced exactly the false failures you would expect.

A stat() bug was caught the same way: `stat` computes a sha1 by default, so
checking that data.mdb exists was hashing the entire 40 GB blockchain. --check
found it before a real run did.

── Exposure ────────────────────────────────────────────────────────────────
Caddy on vipy terminates TLS; the upstream is reached over the tailnet, which
needed a headscale ACL entry for tag:monerod-box:8081 - without it the node is
invisible, not merely unreachable, and the symptom is a 502 "no such host".

No authentication, deliberately: it is a block explorer over public chain data.
That includes --enable-pusher, so a visitor can relay a raw transaction through
our node. A choice, not an oversight; flip xmrblocks_enable_pusher to close it.

── Also ────────────────────────────────────────────────────────────────────
monerod-box raised 2048 -> 6144 MiB. Not for the explorer: monerod alone had
outgrown 2 GB past ~39% of the chain and was OOM-killed twice in a morning at
1.74 GB anon-rss. Recorded in vms.auto.tfvars because ignore_changes = all means
tofu will not reconcile it. The box now idles at ~1.2 GB of 5.9 GB with both
services up.

No backups, deliberately - binary, templates and chain are all reproducible.

Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>

ansible/group_vars/all/main.yml

@@ -53,6 +53,10 @@ subdomains:
   # monerod's own Digest auth does the authentication.
   monero: monero
 
+  # Monero block explorer (monerod-box, proxied via vipy). Fully public and
+  # unauthenticated, like any block explorer - the data is the public chain.
+  monero_explorer: exmrplore
+
 # Read by plays across several groups, so global rather than group_vars/<group>.
 headscale_namespace: counter-net
 

ansible/host_vars/monerod_box_local/main.yml

@@ -9,6 +9,9 @@
 monero_p2p_port: 18080
 monero_restricted_rpc_port: 18089
 
+# The explorer's HTTP port, read by the Caddy play on the edge host.
+xmrblocks_port: 8081
+
 # The 500 GB disk added to this VM in Proxmox as scsi1. Named here rather than
 # left to the role default so that "which disk holds the blockchain" is a
 # property of the machine, recorded next to the machine. The role only ever
@@ -25,3 +28,4 @@ monero_data_device: /dev/sdb
 # supervision and would be noise.
 monitored_services:
   - monerod
+  - xmrblocks

ansible/infra/402_public_monitoring.yml

@@ -32,6 +32,7 @@
       - {sub: "{{ subdomains.mempool }}",            host: vipy}
       - {sub: "{{ subdomains.datum_gateway }}",      host: vipy}
       - {sub: "{{ subdomains.monero }}",             host: vipy}
+      - {sub: "{{ subdomains.monero_explorer }}",    host: vipy}
 
     # A public resolver on purpose: this must test what the internet sees, not
     # what a local cache or the tailnet's MagicDNS happens to answer.
@@ -55,6 +56,7 @@
       # Digest challenge. Asserting 200 here would go green precisely when
       # rpc-login broke and the node started serving the world for free.
       - {name: monero,      sub: "{{ subdomains.monero }}",             path: "/get_info", status: 401}
+      - {name: exmrplore,   sub: "{{ subdomains.monero_explorer }}",    path: "/",       status: 200}
 
     # Ports published from the edge host by socket_proxy.
     public_tcp:

ansible/infra/403_service_probe_registration.yml

@@ -46,6 +46,7 @@
       - {name: mempool-backend,  host: mempool_box_local}
       - {name: mempool-frontend, host: mempool_box_local}
       - {name: monerod,          host: monerod_box_local}
+      - {name: xmrblocks,        host: monerod_box_local}
 
   tasks:
     - name: Build the probe endpoint list

ansible/roles/xmrblocks/README.md

@@ -0,0 +1,176 @@
+# xmrblocks
+
+The [Onion Monero Blockchain Explorer](https://github.com/moneroexamples/onion-monero-blockchain-explorer),
+on `monerod-box` beside the node, published at `exmrplore.contrapeso.xyz`.
+
+## Why this role installs a binary instead of building one
+
+Every other compiled service in this estate builds on its own host —
+`bitcoin_knots` and `datum_gateway` both do. This one cannot, and the reason is
+worth recording so nobody "fixes" it later.
+
+`xmrblocks` is not a client of monerod. Its `cmake/FindMonero.cmake` imports 21
+**static libraries** out of a compiled monero source tree and its headers, because
+it opens the LMDB directly rather than going through RPC. Building it therefore
+means compiling monero first — and the release tarball we install for the daemon
+contains only executables, no `.a` files and no headers, so there is nothing on
+the box to link against.
+
+Measured on Debian 13, building only the libraries `xmrblocks` needs:
+
+| | |
+|---|---|
+| peak RSS, one `cc1plus` | **~3.2 GB** |
+| peak RSS, `-j4` concurrent | **~5.5 GB** |
+| wall time, `-j4` | 167 s |
+| build tree | 125 MB (source 70 MB) |
+| toolchain | 1.6 GB |
+
+`monerod-box` had **2 GB** when this was measured (it has since been raised to
+6 GB, for monerod's own sake — see below). It was tried at 768 MiB and 1800 MiB,
+at `-j1` and `-j2`, and every combination was OOM-killed — a single translation unit
+exceeding 3 GB is not something lower parallelism can work around. Disk was
+never the constraint; the often-quoted "~10 GB" for a monero build describes
+upstream's full `make`, which also produces monerod, both wallets and the test
+suite, none of which are linked here.
+
+So the binary is built elsewhere by **`scripts/build-xmrblocks.sh`**, which runs
+the whole thing in a `debian:13` container. That matters: an artifact only one
+machine can produce is an artifact nobody can audit. Any host with Docker and
+~6 GB of RAM reproduces it, and the script verifies the monero source against
+binaryFate's GPG signature exactly as `roles/monero` does for the daemon.
+
+The role refuses to ship anything it has not checked: `xmrblocks_sha256` is
+asserted **on the control node, before the copy**, against the value the build
+script prints.
+
+## Three upstream problems, and the fixes
+
+None of these are documented anywhere. All three were found by building.
+
+1. **`libasio-dev` is missing from upstream's dependency list.** The Dockerfile
+   is Ubuntu-based and installs `libboost-all-dev`; Crow wants standalone
+   `asio.hpp`, not `boost/asio.hpp`. On Debian 13 the build dies with
+   `asio.hpp: No such file or directory`.
+
+2. **The explorer does not compile against monero v0.18.5.1.** v0.18.5.0 changed
+
+   ```cpp
+   crypto::hash get_pruned_transaction_hash(const transaction&, const crypto::hash&);
+   bool         get_pruned_transaction_hash(const transaction&, const crypto::hash&, crypto::hash& res);
+   ```
+
+   and `src/page.h` still calls the old form. Upstream's Dockerfile pins
+   `MONERO_BRANCH=v0.18.4.0`, which is why nobody has hit it. The build script
+   applies a one-line patch, **anchored on the exact source line** so that if
+   upstream ever fixes it the build stops loudly instead of silently doing
+   something else.
+
+   We patch rather than build against v0.18.4.0 deliberately: the current signed
+   `hashes.txt` only covers the current release, so using the older source would
+   mean giving up the provenance chain. The LMDB format is `VERSION 5` in both,
+   so either version reads the other's database safely.
+
+3. **`FindMonero.cmake` looks for miniupnpc inside the monero build tree** with
+   `NO_DEFAULT_PATH`, but monero stopped vendoring miniupnp as a submodule. Fixed
+   with a `-D Xmr_MINIUPNPC_LIBRARY=` cache override pointing at the system
+   library, rather than patching their cmake.
+
+`USE_DEVICE_TREZOR=OFF` is also passed: an explorer has no use for hardware
+wallet support, and it drops the generated protobuf units, which are among the
+heaviest to compile. `xmrblocks` was verified to link against the resulting
+libraries.
+
+## Two things the unit gets right that look wrong
+
+**`WorkingDirectory` is load-bearing.** `src/page.h` hardcodes
+`#define TMPL_DIR "./templates"` — the HTML is resolved relative to the process
+working directory, at request time. Get it wrong and the service starts happily,
+listens on 8081, and returns 500 for every page. That is also why the health
+check fetches a real page and greps it rather than just probing the port.
+
+**`ReadWritePaths` must include the blockchain directory**, even though the
+database is opened read-only. `MicroCore::init` sets `DBF_RDONLY`, and monero's
+`db_lmdb.cpp` turns that into `mdb_flags = MDB_RDONLY` **without `MDB_NOLOCK`** —
+so LMDB still registers this process in the reader table inside `lock.mdb`. With
+`ProtectSystem=strict` and nothing writable, the open fails outright. The
+intuitive "it only reads, grant it nothing" is wrong. `data.mdb` itself remains
+read-only to the process, and writing to monerod's lock table is what any second
+reader does.
+
+## Exposure
+
+Published by `caddy_site` on the edge host at `exmrplore.contrapeso.xyz`, with
+TLS terminated there and the upstream reached over the tailnet via MagicDNS.
+
+The explorer listens on `0.0.0.0:8081`. Nothing on the LAN or the internet
+reaches that directly: Tailscale's `ts-input` chain sits ahead of UFW, so only
+tailnet peers can, and the Headscale ACL grants `tag:prd-vipy` exactly
+`tag:monerod-box:8081`. A node with no ACL rule is *invisible* rather than
+merely unreachable — it never appears in `tailscale status`, MagicDNS does not
+resolve it, and the symptom is a Caddy 502 saying "no such host".
+
+**There is no authentication, by choice.** A block explorer serves public chain
+data. But note what that includes: `--enable-pusher` is on (upstream's default),
+so any visitor can submit a raw transaction and have *our* node relay it. That is
+a deliberate decision, not an oversight — drop `xmrblocks_enable_pusher` to
+`false` to close it.
+
+`--enable-json-api` and `--enable-autorefresh-option` are likewise upstream's
+defaults.
+
+## Monitoring
+
+| Endpoint | Source | Answers |
+|---|---|---|
+| `services/monerod-box-local/xmrblocks` | `infra/401` via `monitored_services` | is the unit active |
+| `probe/xmrblocks` | this role + `infra/403` | does it serve a real page |
+| `dns/exmrplore.contrapeso.xyz`, `public/exmrplore` | `infra/402` | can the internet reach it |
+
+`public/exmrplore` asserts **200**, unlike the Monero RPC endpoint next door
+which asserts 401 — this one genuinely has no auth in front of it.
+
+The timer carries no `Requires=xmrblocks.service`; see the comment in
+`healthcheck.timer.j2` for why that would be backwards.
+
+## Backups: none, deliberately
+
+Everything here is derived or reproducible: the binary comes from
+`scripts/build-xmrblocks.sh`, the templates ship with it, and the data it serves
+is monerod's blockchain, which is itself excluded for the same reason. There is
+no state on this service worth a backup job. Recorded as a decision so it does
+not read as an oversight — the same treatment `phoenixd` and `monero` get.
+
+## Upgrading
+
+1. Edit the pins at the top of `scripts/build-xmrblocks.sh` (`EXPLORER_COMMIT`,
+   and `MONERO_VERSION` + `MONERO_SRC_SHA256` together).
+2. Run it. It prints the new artifact sha256.
+3. Put that in `xmrblocks_sha256` and `xmrblocks_explorer_commit` here.
+4. Converge. The role asserts the checksum before copying anything.
+
+If the patch anchor no longer matches, the script stops — read the diff before
+forcing it.
+
+## Runtime cost, and the RAM history
+
+On **2026-09-20 the VM was raised from 2 GB to 6 GB**, and that was not for the
+explorer. monerod alone had outgrown 2 GB once the chain passed ~39%: it was
+OOM-killed twice in one morning at 1.74 GB anon-rss, restarting every hour. With
+6 GB the box sits at ~1.2 GB used of 5.9 GB with both services running
+(monerod ~1.0 GB, xmrblocks ~96 MB).
+
+**The disk is the real performance limit, not memory.** `proxmox-tank-1` is a
+spinning-disk mirror, and xmrblocks says so on startup: *"The blockchain is on a
+rotating drive: this will be very slow, use an SSD if possible"*. Measured
+consequences, both of which the role accounts for:
+
+- first start takes ~98 seconds to open the LMDB before it binds, so
+  `wait_for` allows 300s
+- a COLD index page took **68 seconds**, while the two requests after it took
+  0.87s and 0.012s — so the health check allows 90s and its unit 180s. A short
+  timeout there does not detect a slow explorer, it manufactures false DOWNs.
+
+Footprint note: xmrblocks mmaps the LMDB, so most of its apparent size is
+reclaimable page cache rather than anonymous memory, and `--concurrency` is held
+at 2 for the same reason.

ansible/roles/xmrblocks/defaults/main.yml

@@ -0,0 +1,75 @@
+# xmrblocks - the Onion Monero Blockchain Explorer.
+# https://github.com/moneroexamples/onion-monero-blockchain-explorer
+#
+# This role INSTALLS a prebuilt binary; it does not compile one. xmrblocks links
+# 21 static libraries out of a compiled monero source tree, and building that
+# needs ~3.2 GB of RAM for a single compiler (~5.5 GB at -j4). monerod-box has
+# 2 GB, so it cannot build this at any -j. See README.md.
+#
+# The artifact is produced by scripts/build-xmrblocks.sh, which runs the whole
+# build in a debian:13 container - so it is reproducible on any machine with
+# Docker, not just the one that happened to build it.
+
+# --- The artifact ------------------------------------------------------------
+# A directory on the CONTROL NODE holding `xmrblocks`, `templates/` and MANIFEST.
+xmrblocks_artifact_dir: "{{ lookup('env', 'HOME') }}/personal_infra_artifacts/xmrblocks"
+
+# Pinned checksum of the binary we intend to ship. Asserted on the control node
+# BEFORE anything is copied: shipping an unverified binary to a host is the one
+# thing this role must never do. Update it together with the build pins in
+# scripts/build-xmrblocks.sh.
+xmrblocks_sha256: "a40c495e73a44fbb3b666fcd8a01466a2aef12ed1906558f3d5b7e458c256af6"
+
+# Recorded so the deployed host can be matched back to a build.
+xmrblocks_explorer_commit: "29593b709edeb23daba035009ccd134a5862543a"
+xmrblocks_monero_version: "0.18.5.1"
+
+# --- Install layout ----------------------------------------------------------
+# The binary hardcodes TMPL_DIR as "./templates", relative to the working
+# directory - so templates MUST sit beside the binary and the unit MUST set
+# WorkingDirectory. Get that wrong and it starts fine, then fails per-request.
+xmrblocks_dir: /opt/xmrblocks
+
+# Runs as the monero user: the explorer opens monerod's LMDB directly, and
+# /var/lib/monero is 0750 monero:monero. It opens it READ-ONLY (DBF_RDONLY in
+# MicroCore::init), so it is safe alongside a running monerod.
+xmrblocks_user: monero
+xmrblocks_group: monero
+
+# --- Runtime -----------------------------------------------------------------
+# The LMDB directory, not the data directory: monerod's data-dir plus /lmdb.
+xmrblocks_bc_path: /var/lib/monero/lmdb
+
+# 0.0.0.0 so the edge host can reach it over the tailnet. Nothing on the LAN or
+# the internet can: Tailscale's ts-input chain sits ahead of UFW, and the only
+# public route is the Caddy vhost on vipy.
+xmrblocks_bind: "0.0.0.0"
+xmrblocks_port: 8081
+
+# The unrestricted RPC on loopback. Used for the mempool view and tx pushing.
+xmrblocks_daemon_url: "127.0.0.1:18081"
+# monerod's --rpc-login guards BOTH its RPC servers, so the explorer needs it.
+xmrblocks_rpc_user: "{{ monero_rpc_user | default('') }}"
+xmrblocks_rpc_password: "{{ monero_rpc_password | default('') }}"
+
+# Upstream's own defaults (the Dockerfile CMD).
+# NOTE: enable-pusher lets a visitor submit a raw transaction through YOUR node.
+# It is a deliberate choice here, not an oversight.
+xmrblocks_enable_json_api: true
+xmrblocks_enable_autorefresh: true
+xmrblocks_enable_pusher: true
+
+# Crow's thread count. Held low on purpose: this box has 2 GB and monerod
+# already uses ~1.3 GB of it.
+xmrblocks_concurrency: 2
+
+# The unit file carries the RPC login, so --diff is suppressed by default.
+xmrblocks_reveal_config: false
+
+# --- Health check ------------------------------------------------------------
+# WHERE TO REPORT HEALTH — the one place to plug in monitoring. Empty means
+# check, exit honestly, report nowhere.
+healthcheck_push_url: ""
+# Bearer token for the Gatus external endpoint. Required whenever a push URL
+# is set: Gatus rejects an unauthenticated push with 401.
+healthcheck_push_token: ""

ansible/roles/xmrblocks/handlers/main.yml

@@ -0,0 +1,12 @@
+---
+- name: Restart xmrblocks
+  systemd:
+    name: xmrblocks
+    state: restarted
+    daemon_reload: yes
+
+- name: Restart xmrblocks health check timer
+  systemd:
+    name: xmrblocks-healthcheck.timer
+    state: restarted
+    daemon_reload: yes

ansible/roles/xmrblocks/tasks/healthcheck.yml

@@ -0,0 +1,54 @@
+---
+# "Does the explorer actually serve a page", as opposed to infra/401's "is the
+# unit active". xmrblocks can be perfectly `active` and still fail every
+# request - a missing templates directory does exactly that.
+
+- name: Install the health check's dependencies
+  apt:
+    name:
+      - curl
+    state: present
+
+- name: Create the xmrblocks health check script
+  ansible.builtin.template:
+    src: healthcheck.sh.j2
+    dest: /usr/local/bin/xmrblocks-healthcheck-push.sh
+    owner: root
+    group: root
+    mode: '0755'
+    validate: "bash -n %s"
+
+# 0600: carries the Gatus bearer token.
+- name: Create the xmrblocks health check systemd service
+  ansible.builtin.template:
+    src: healthcheck.service.j2
+    dest: /etc/systemd/system/xmrblocks-healthcheck.service
+    owner: root
+    group: root
+    mode: '0600'
+  notify: Restart xmrblocks health check timer
+
+- name: Create the xmrblocks health check systemd timer
+  ansible.builtin.template:
+    src: healthcheck.timer.j2
+    dest: /etc/systemd/system/xmrblocks-healthcheck.timer
+    owner: root
+    group: root
+    mode: '0644'
+  notify: Restart xmrblocks health check timer
+
+- name: Reload systemd daemon after health check units
+  systemd:
+    daemon_reload: yes
+
+# Ungated: enabling a timer is deployment, not monitoring.
+- name: Enable and restart the xmrblocks health check timer
+  systemd:
+    name: xmrblocks-healthcheck.timer
+    enabled: yes
+    state: restarted
+    daemon_reload: yes
+
+- name: Run the xmrblocks health check once to arm the timer
+  ansible.builtin.command: systemctl start xmrblocks-healthcheck.service
+  changed_when: false

ansible/roles/xmrblocks/tasks/install.yml

@@ -0,0 +1,129 @@
+---
+# Install the prebuilt xmrblocks artifact produced by scripts/build-xmrblocks.sh.
+#
+# The verification happens on the CONTROL NODE, before a single byte is copied.
+# Shipping a binary to a host and checking it afterwards is not verification,
+# it is an apology.
+
+- name: Assert the artifact checksum is pinned
+  ansible.builtin.assert:
+    that:
+      - xmrblocks_sha256 | length == 64
+    quiet: true
+    fail_msg: >-
+      xmrblocks_sha256 is not set. Build the artifact with
+      scripts/build-xmrblocks.sh and pin the sha it prints, so this role cannot
+      ship a binary nobody has checked.
+
+- name: Check the artifact on the control node
+  ansible.builtin.stat:
+    path: "{{ xmrblocks_artifact_dir }}/xmrblocks"
+    checksum_algorithm: sha256
+    get_checksum: yes
+  delegate_to: localhost
+  become: no
+  register: xmrblocks_local
+  changed_when: false
+
+- name: Assert the artifact exists and matches the pinned checksum
+  ansible.builtin.assert:
+    that:
+      - xmrblocks_local.stat.exists
+      - xmrblocks_local.stat.checksum == xmrblocks_sha256
+    quiet: true
+    fail_msg: >-
+      {{ xmrblocks_artifact_dir }}/xmrblocks is
+      {{ 'missing - run scripts/build-xmrblocks.sh'
+         if not xmrblocks_local.stat.exists
+         else 'sha256 ' ~ xmrblocks_local.stat.checksum ~ ', expected ' ~ xmrblocks_sha256 }}
+
+- name: Check the templates directory on the control node
+  ansible.builtin.stat:
+    path: "{{ xmrblocks_artifact_dir }}/templates/index.html"
+  delegate_to: localhost
+  become: no
+  register: xmrblocks_local_templates
+  changed_when: false
+
+# The binary resolves TMPL_DIR as "./templates" at request time, so a missing
+# templates directory is not a startup error - it is a 500 on the first page
+# view. Catch it here instead.
+- name: Assert the templates came with the artifact
+  ansible.builtin.assert:
+    that:
+      - xmrblocks_local_templates.stat.exists
+    quiet: true
+    fail_msg: "{{ xmrblocks_artifact_dir }}/templates/index.html is missing - the artifact is incomplete"
+
+- name: Install the runtime shared libraries xmrblocks needs
+  apt:
+    name:
+      # From `objdump -p xmrblocks | grep NEEDED`. Boost is version-locked to
+      # the build image's Debian release; monerod-box is Debian 13 and the
+      # artifact is built in debian:13, so 1.83 matches on both sides.
+      - libboost-chrono1.83.0
+      - libboost-filesystem1.83.0
+      - libboost-program-options1.83.0
+      - libboost-serialization1.83.0
+      - libboost-thread1.83.0
+      - libhidapi-libusb0
+      - libunbound8
+      - libunwind8
+    state: present
+    update_cache: yes
+
+- name: Create the xmrblocks directory
+  ansible.builtin.file:
+    path: "{{ xmrblocks_dir }}"
+    state: directory
+    owner: root
+    group: root
+    mode: '0755'
+
+- name: Install the xmrblocks binary
+  ansible.builtin.copy:
+    src: "{{ xmrblocks_artifact_dir }}/xmrblocks"
+    dest: "{{ xmrblocks_dir }}/xmrblocks"
+    owner: root
+    group: root
+    mode: '0755'
+  notify: Restart xmrblocks
+
+- name: Install the xmrblocks templates
+  ansible.builtin.copy:
+    src: "{{ xmrblocks_artifact_dir }}/templates/"
+    dest: "{{ xmrblocks_dir }}/templates/"
+    owner: root
+    group: root
+    mode: '0644'
+    directory_mode: '0755'
+  notify: Restart xmrblocks
+
+- name: Record which build is deployed
+  ansible.builtin.copy:
+    src: "{{ xmrblocks_artifact_dir }}/MANIFEST"
+    dest: "{{ xmrblocks_dir }}/MANIFEST"
+    owner: root
+    group: root
+    mode: '0644'
+
+- name: Assert the blockchain database is where we think it is
+  ansible.builtin.stat:
+    path: "{{ xmrblocks_bc_path }}/data.mdb"
+    # data.mdb is the whole blockchain - tens of GB and growing. stat computes a
+    # sha1 by DEFAULT, so without these it hashes the entire chain just to answer
+    # "does this file exist", and the play hangs for many minutes.
+    get_checksum: no
+    get_mime: no
+    get_attributes: no
+  register: xmrblocks_lmdb
+
+- name: Fail if the LMDB is missing
+  ansible.builtin.assert:
+    that:
+      - xmrblocks_lmdb.stat.exists
+    quiet: true
+    fail_msg: >-
+      No LMDB at {{ xmrblocks_bc_path }}/data.mdb. xmrblocks reads monerod's
+      database directly, so it has nothing to serve. Check that monerod is
+      deployed and its data disk is mounted.

ansible/roles/xmrblocks/tasks/main.yml

@@ -0,0 +1,6 @@
+---
+# import_tasks, not include_tasks: static imports stay visible to --list-tasks,
+# which is the main verification tool in this repo.
+- ansible.builtin.import_tasks: install.yml
+- ansible.builtin.import_tasks: service.yml
+- ansible.builtin.import_tasks: healthcheck.yml

ansible/roles/xmrblocks/tasks/service.yml

@@ -0,0 +1,57 @@
+---
+- name: Assert the daemon RPC credentials are available
+  ansible.builtin.assert:
+    that:
+      - xmrblocks_rpc_user | length > 0
+      - xmrblocks_rpc_password | length > 0
+    quiet: true
+    fail_msg: >-
+      xmrblocks needs monerod's RPC login: --rpc-login guards both of monerod's
+      RPC servers, so without it the mempool view and the pusher get 401.
+
+- name: Create the xmrblocks systemd unit
+  ansible.builtin.template:
+    src: xmrblocks.service.j2
+    dest: /etc/systemd/system/xmrblocks.service
+    owner: root
+    group: root
+    mode: '0644'
+  # The unit embeds --daemon-login in ExecStart, so --diff would print the
+  # RPC password. -e xmrblocks_reveal_config=true when you need to see it.
+  diff: "{{ xmrblocks_reveal_config | default(false) | bool }}"
+  notify: Restart xmrblocks
+
+- name: Reload systemd daemon
+  systemd:
+    daemon_reload: yes
+
+- name: Enable and start xmrblocks
+  systemd:
+    name: xmrblocks
+    enabled: yes
+    state: started
+
+- name: Flush handlers so xmrblocks is running before we probe it
+  meta: flush_handlers
+
+# Generous on purpose. xmrblocks opens the whole LMDB before it binds, and this
+# pool is a spinning-disk mirror - it logs "The blockchain is on a rotating
+# drive: this will be very slow" and took 98 SECONDS to come up on first start.
+# 90s was not enough and produced a scary failure on a service that was fine.
+- name: Wait for the xmrblocks HTTP port
+  ansible.builtin.wait_for:
+    port: "{{ xmrblocks_port }}"
+    host: 127.0.0.1
+    delay: 5
+    timeout: 300
+  ignore_errors: yes
+
+- name: Check the xmrblocks service status
+  systemd:
+    name: xmrblocks
+  register: xmrblocks_status
+  changed_when: false
+
+- name: Display the xmrblocks service status
+  ansible.builtin.debug:
+    msg: "xmrblocks is {{ 'running' if xmrblocks_status.status.ActiveState == 'active' else 'NOT running' }}"

ansible/roles/xmrblocks/templates/healthcheck.service.j2

@@ -0,0 +1,20 @@
+[Unit]
+Description=Onion Monero Blockchain Explorer Health Check
+After=network.target xmrblocks.service
+
+[Service]
+Type=oneshot
+User=root
+ExecStart=/usr/local/bin/xmrblocks-healthcheck-push.sh
+# Longer than the script's 90s curl plus its push retries. A oneshot defaults to
+# TimeoutStartSec=90, which would kill the check mid-request on a cold cache and
+# report a failure that says nothing about the service.
+TimeoutStartSec=180
+Environment=HEALTHCHECK_PUSH_URL={{ healthcheck_push_url }}
+Environment=HEALTHCHECK_PUSH_TOKEN={{ healthcheck_push_token }}
+Environment=XMRBLOCKS_URL=http://127.0.0.1:{{ xmrblocks_port }}
+StandardOutput=journal
+StandardError=journal
+
+[Install]
+WantedBy=multi-user.target

ansible/roles/xmrblocks/templates/healthcheck.sh.j2

@@ -0,0 +1,59 @@
+#!/bin/bash
+# xmrblocks health check — managed by Ansible (roles/xmrblocks)
+#
+# The exit code is the answer and systemd keeps it:
+#     systemctl is-failed xmrblocks-healthcheck.service
+# Reporting anywhere else is optional and generic.
+#
+# This fetches a real page rather than just opening the port. The binary
+# resolves its HTML as "./templates" relative to the working directory, so a
+# deploy that got WorkingDirectory wrong listens happily on 8081 and fails
+# every request. A TCP check would call that healthy.
+
+URL="${XMRBLOCKS_URL:-http://127.0.0.1:8081}"
+PUSH_URL="${HEALTHCHECK_PUSH_URL:-}"
+PUSH_TOKEN="${HEALTHCHECK_PUSH_TOKEN:-}"
+
+report() {
+    local status=$1
+    local msg=$2
+
+    # No push URL is normal, not an error: the exit code below is still a
+    # complete answer for anything reading unit state.
+    [ -n "$PUSH_URL" ] || return 0
+
+    local encoded_msg="${msg// /%20}"
+    local _ok=false
+    [ "${status}" = "up" ] && _ok=true
+    curl -s --max-time 15 --retry 2 -o /dev/null -X POST \
+        -H "Authorization: Bearer ${PUSH_TOKEN}" \
+        "${PUSH_URL}?success=${_ok}&error=${encoded_msg}" || true
+}
+
+# 90s, not the obvious 10 or 25. The index page renders ~46 KB from the LMDB,
+# and this pool is a spinning-disk mirror shared with a syncing monerod: a COLD
+# request measured 68 SECONDS, while the two immediately after it took 0.87s and
+# 0.012s. A short timeout here does not detect a slow explorer, it manufactures
+# a false DOWN every time the page cache has gone cold between runs.
+body=$(curl -s --max-time 90 -w '\n%{http_code}' "${URL}/" 2>/dev/null)
+code=$(printf '%s' "$body" | tail -1)
+
+if [ -z "$code" ] || [ "$code" = "000" ]; then
+    report "down" "xmrblocks not responding"
+    exit 1
+fi
+
+if [ "$code" != "200" ]; then
+    report "down" "xmrblocks HTTP ${code}"
+    exit 1
+fi
+
+# A 200 that is not the explorer is still a failure. The index page always
+# carries the project name in its title.
+if ! printf '%s' "$body" | grep -qi "monero"; then
+    report "down" "xmrblocks served 200 but not an explorer page (templates missing?)"
+    exit 1
+fi
+
+report "up" "OK"
+exit 0

ansible/roles/xmrblocks/templates/healthcheck.timer.j2

@@ -0,0 +1,14 @@
+[Unit]
+Description=Onion Monero Blockchain Explorer Health Check Timer
+# Deliberately NO `Requires=xmrblocks.service`. Requires on a timer stops the
+# timer when the watched unit stops - "if the thing I am watching goes down,
+# stop watching it" - leaving nothing to re-arm when it returns. Fulcrum's
+# timer carried it and sat active+enabled for seven months without firing.
+
+[Timer]
+OnBootSec=2min
+OnUnitActiveSec=5min
+Persistent=true
+
+[Install]
+WantedBy=timers.target

ansible/roles/xmrblocks/templates/xmrblocks.service.j2

@@ -0,0 +1,58 @@
+[Unit]
+Description=Onion Monero Blockchain Explorer (xmrblocks)
+Documentation=https://github.com/moneroexamples/onion-monero-blockchain-explorer
+After=network-online.target monerod.service
+Wants=network-online.target
+# The explorer reads monerod's LMDB directly. If the blockchain disk is not
+# mounted there is nothing to serve, and without this the unit would start and
+# fail on every request instead of refusing to start at all.
+RequiresMountsFor={{ xmrblocks_bc_path }}
+
+[Service]
+Type=simple
+User={{ xmrblocks_user }}
+Group={{ xmrblocks_group }}
+
+# NOT decoration: the binary hardcodes TMPL_DIR as "./templates", so it resolves
+# its HTML relative to the working directory. Without this it starts happily and
+# then 500s on the first page view.
+WorkingDirectory={{ xmrblocks_dir }}
+
+ExecStart={{ xmrblocks_dir }}/xmrblocks \
+    --bc-path {{ xmrblocks_bc_path }} \
+    --daemon-url {{ xmrblocks_daemon_url }} \
+    --daemon-login {{ xmrblocks_rpc_user }}:{{ xmrblocks_rpc_password }} \
+    --bindaddr {{ xmrblocks_bind }} \
+    --port {{ xmrblocks_port }} \
+    --concurrency {{ xmrblocks_concurrency }}{% if xmrblocks_enable_json_api %} \
+    --enable-json-api{% endif %}{% if xmrblocks_enable_autorefresh %} \
+    --enable-autorefresh-option{% endif %}{% if xmrblocks_enable_pusher %} \
+    --enable-pusher{% endif %}
+
+
+Restart=always
+RestartSec=20
+TimeoutStopSec=30
+
+StandardOutput=journal
+StandardError=journal
+
+# Hardening. The explorer serves static templates and reads the chain.
+NoNewPrivileges=true
+PrivateTmp=true
+ProtectSystem=strict
+ProtectHome=read-only
+
+# The LMDB directory must be WRITABLE even though the database is opened
+# read-only. monero sets `mdb_flags = MDB_RDONLY` without MDB_NOLOCK
+# (db_lmdb.cpp), so LMDB still registers this process in the reader table
+# inside lock.mdb. With ProtectSystem=strict and no ReadWritePaths the open
+# fails outright - the obvious "it only reads, so grant nothing" is wrong here.
+# Writing to monerod's own lock table is normal and is what any second reader
+# does; data.mdb itself stays read-only to this process.
+ReadWritePaths={{ xmrblocks_bc_path }}
+
+LimitNOFILE=16384
+
+[Install]
+WantedBy=multi-user.target

ansible/services/headscale/templates/acl.json.j2

@@ -43,6 +43,7 @@
         "tag:mempool-box:8080",
         "tag:memos-box:5230",
         "tag:monerod-box:18089",
+        "tag:monerod-box:8081",
         "tag:arbret-staging-box:80",
         "tag:stalwart-box:25",
         "tag:stalwart-box:465",

ansible/services/xmrblocks/deploy_xmrblocks_playbook.yml

@@ -0,0 +1,39 @@
+---
+# The Monero block explorer, on the same box as the node.
+#
+# xmrblocks reads monerod's LMDB directly rather than going through RPC, which
+# is why it lives here and not on its own VM. It is a 26 MB binary and 132 KB
+# of templates; the expensive part is building it, and that happens elsewhere
+# (scripts/build-xmrblocks.sh) because this box has 2 GB and a single monero
+# translation unit needs ~3.2 GB. See roles/xmrblocks/README.md.
+- name: Deploy the Monero blockchain explorer
+  hosts: monero
+  become: yes
+  vars:
+    healthcheck_push_url: "https://{{ subdomains.gatus }}.{{ root_domain }}/api/v1/endpoints/probe_xmrblocks/external"
+    healthcheck_push_token: "{{ gatus_push_tokens[inventory_hostname] }}"
+  roles:
+    - xmrblocks
+
+- name: Publish the explorer from the edge host
+  hosts: edge
+  become: yes
+  tasks:
+    # No basic auth: this is a public block explorer over public chain data,
+    # which is what a block explorer is for. Caddy terminates TLS and proxies.
+    # Note the explorer has NO authentication of its own, so everything it can
+    # do is world-reachable - including the tx pusher, which relays a raw
+    # transaction through our node. That is deliberate; see the role README.
+    - name: Expose the Monero explorer over HTTPS
+      ansible.builtin.include_role:
+        name: caddy_site
+      vars:
+        caddy_site_name: monero-explorer
+        caddy_site_domain: "{{ subdomains.monero_explorer }}.{{ root_domain }}"
+        caddy_site_upstream: "{{ hostvars['monerod_box_local'].ansible_host }}:{{ hostvars['monerod_box_local'].xmrblocks_port }}"
+        caddy_site_resolvers: "100.100.100.100"
+
+    # The per-site validate cannot catch a conflict between sites.
+    - name: Validate the whole Caddyfile
+      ansible.builtin.command: caddy validate --config /etc/caddy/Caddyfile --adapter caddyfile
+      changed_when: false

ansible/site.yml

@@ -54,6 +54,7 @@
 - import_playbook: services/datum-gateway/deploy_datum_gateway_playbook.yml
 - import_playbook: services/mempool/deploy_mempool_playbook.yml
 - import_playbook: services/monero/deploy_monero_playbook.yml
+- import_playbook: services/xmrblocks/deploy_xmrblocks_playbook.yml
 - import_playbook: services/memos/deploy_memos_playbook.yml
 - import_playbook: services/forgejo-runner/deploy_forgejo_runner_playbook.yml
 - import_playbook: services/phoenixd/deploy_phoenixd_playbook.yml

scripts/build-xmrblocks.sh

@@ -0,0 +1,180 @@
+#!/usr/bin/env bash
+#
+# Build xmrblocks (the Onion Monero Blockchain Explorer) reproducibly.
+#
+# WHY THIS SCRIPT EXISTS
+# ----------------------
+# xmrblocks is not a client of monerod. It links 21 static libraries out of a
+# compiled monero source tree and opens the LMDB directly, so building it means
+# first compiling monero itself. Measured on Debian 13: a single cc1plus peaks
+# at ~3.1 GB and a -j4 build peaks at ~5.5 GB. monerod-box has 2 GB, so it
+# cannot build this at any level of parallelism - the binary has to be built
+# elsewhere and shipped.
+#
+# Shipping a binary that only one machine can produce is how estates end up
+# with artefacts nobody can rebuild. This script is the answer to that: it runs
+# the whole build inside a debian:13 container, so any machine with Docker and
+# ~6 GB of RAM produces the same binary. Nothing is installed on the host.
+#
+# WHAT IT GUARANTEES
+#   - the monero source is the GPG-signed release tarball, verified against
+#     binaryFate's key (the same chain roles/monero uses for the daemon)
+#   - the explorer is pinned to an exact commit
+#   - the one upstream patch is applied from an anchor, and the script FAILS
+#     if the anchor is missing rather than silently skipping it
+#
+# WHAT IT IS NOT
+#   Not bit-for-bit reproducible. Debian's toolchain, timestamps and build
+#   paths all leak in. It is repeatable, not deterministic; the MANIFEST
+#   records what went in so two builds can be compared.
+#
+# Usage:  scripts/build-xmrblocks.sh [output-dir]
+# Needs:  docker, ~6 GB RAM available to it, ~2 GB disk
+set -euo pipefail
+
+# --- Pins. Change these together and rebuild. --------------------------------
+MONERO_VERSION="0.18.5.1"
+MONERO_SRC_TARBALL="monero-source-v${MONERO_VERSION}.tar.bz2"
+MONERO_SRC_URL="https://downloads.getmonero.org/cli/${MONERO_SRC_TARBALL}"
+# From the GPG-signed hashes.txt. Verified by the container, not trusted from here.
+MONERO_SRC_SHA256="9ec6ed0fd37db9d81cf7738a5f0536cf9aec6ed8ef8fd48649a59a6aaf20de3d"
+BINARYFATE_FPR="81AC591FE9C4B65C5806AFC3F0AF4D462A0BDF92"
+
+EXPLORER_REPO="https://github.com/moneroexamples/onion-monero-blockchain-explorer.git"
+EXPLORER_COMMIT="29593b709edeb23daba035009ccd134a5862543a"
+
+BUILD_IMAGE="debian:13"   # must match the TARGET host's Debian release
+JOBS="${JOBS:-4}"
+
+REPO_ROOT="$(cd "$(dirname "${BASH_SOURCE[0]}")/.." && pwd)"
+SIGNING_KEY="${REPO_ROOT}/ansible/roles/monero/files/binaryfate.asc"
+OUT_DIR="${1:-$HOME/personal_infra_artifacts/xmrblocks}"
+
+command -v docker >/dev/null || { echo "docker is required" >&2; exit 1; }
+[ -f "$SIGNING_KEY" ] || { echo "missing signing key: $SIGNING_KEY" >&2; exit 1; }
+
+WORK="$(mktemp -d)"
+trap 'rm -rf "$WORK"' EXIT
+cp "$SIGNING_KEY" "$WORK/binaryfate.asc"
+mkdir -p "$OUT_DIR"
+
+echo "==> building xmrblocks"
+echo "    monero    ${MONERO_VERSION} (signed source tarball)"
+echo "    explorer  ${EXPLORER_COMMIT}"
+echo "    image     ${BUILD_IMAGE}, -j${JOBS}"
+echo "    output    ${OUT_DIR}"
+
+cat > "$WORK/build.sh" <<INNER
+#!/bin/bash
+set -euo pipefail
+export DEBIAN_FRONTEND=noninteractive
+apt-get update -qq
+# libasio-dev is NOT in upstream's dependency list. That list is Ubuntu-based
+# and omits it; on Debian 13 Crow fails with "asio.hpp: No such file".
+# libminiupnpc-dev is needed because monero stopped vendoring miniupnp as a
+# submodule while the explorer's FindMonero.cmake still expects it in-tree.
+apt-get install -y -qq --no-install-recommends \\
+  build-essential cmake pkg-config git ca-certificates curl bzip2 gnupg \\
+  libssl-dev libzmq3-dev libunbound-dev libsodium-dev libunwind-dev \\
+  libreadline-dev libhidapi-dev libusb-1.0-0-dev libprotobuf-dev \\
+  protobuf-compiler libboost-all-dev libcurl4-openssl-dev \\
+  libasio-dev libminiupnpc-dev >/dev/null
+
+cd /build
+
+echo "--> verifying the monero source tarball"
+export GNUPGHOME=/build/gnupg; mkdir -p \$GNUPGHOME; chmod 700 \$GNUPGHOME
+gpg --batch --import /build/binaryfate.asc 2>/dev/null
+gpg --batch --with-colons --fingerprint | awk -F: '/^fpr:/{print \$10}' \\
+  | grep -qx "${BINARYFATE_FPR}" || { echo "signing key is not binaryFate's"; exit 1; }
+curl -sSL -o hashes.txt https://www.getmonero.org/downloads/hashes.txt
+gpg --batch --status-fd 2 --output hashes-verified.txt --decrypt hashes.txt 2>gpg.err
+grep -q "VALIDSIG.*${BINARYFATE_FPR}" gpg.err || { echo "hashes.txt did not verify"; exit 1; }
+curl -sSL -o "${MONERO_SRC_TARBALL}" "${MONERO_SRC_URL}"
+ACTUAL=\$(sha256sum "${MONERO_SRC_TARBALL}" | cut -d' ' -f1)
+[ "\$ACTUAL" = "${MONERO_SRC_SHA256}" ] || { echo "tarball sha mismatch"; exit 1; }
+grep -Fxq "\$ACTUAL  ${MONERO_SRC_TARBALL}" hashes-verified.txt \\
+  || { echo "tarball is not the one binaryFate signed"; exit 1; }
+echo "    source verified against the signed hashes"
+
+tar xjf "${MONERO_SRC_TARBALL}"
+SRC=/build/monero-source-v${MONERO_VERSION}
+
+echo "--> building the monero libraries xmrblocks links against"
+# Only the libraries. Upstream's Dockerfile runs a full \`make\`, which also
+# builds monerod, both wallets and the test suite - none of which are linked
+# into xmrblocks. USE_DEVICE_TREZOR=OFF drops the generated protobuf units too;
+# an explorer has no use for hardware wallets.
+mkdir -p \$SRC/build/release && cd \$SRC/build/release
+cmake -D CMAKE_BUILD_TYPE=Release -D BUILD_TESTS=OFF -D USE_DEVICE_TREZOR=OFF ../.. >/dev/null
+cmake --build . -j${JOBS} --target \\
+  common blocks cryptonote_basic cryptonote_core multisig cryptonote_protocol \\
+  daemonizer mnemonics epee lmdb device wallet-crypto blockchain_db ringct \\
+  wallet cncrypto easylogging version checkpoints randomx hardforks >/dev/null
+
+echo "--> fetching the explorer at ${EXPLORER_COMMIT}"
+cd /build
+git clone -q "${EXPLORER_REPO}" explorer
+cd explorer && git checkout -q "${EXPLORER_COMMIT}"
+
+# monero v0.18.5.0 changed get_pruned_transaction_hash from returning the hash
+# to returning bool with an out-param. The explorer still calls the old form,
+# so it does not compile against the daemon we actually run. Anchored on the
+# exact line: if upstream fixes this, the anchor vanishes and we stop loudly
+# rather than building something unexpected.
+OLD='        txd.hash = get_pruned_transaction_hash(tx, tx.prunable_hash);'
+NEW='        get_pruned_transaction_hash(tx, tx.prunable_hash, txd.hash);'
+if grep -qF "\$OLD" src/page.h; then
+  sed -i "s|\$OLD|\$NEW|" src/page.h
+  echo "    applied get_pruned_transaction_hash patch"
+elif grep -qF "\$NEW" src/page.h; then
+  echo "    upstream already uses the new signature - patch not needed"
+else
+  echo "PATCH ANCHOR NOT FOUND in src/page.h - upstream changed; review before building" >&2
+  exit 1
+fi
+
+echo "--> building xmrblocks"
+mkdir -p build && cd build
+# Xmr_MINIUPNPC_LIBRARY: FindMonero.cmake searches for miniupnpc *inside* the
+# monero build tree with NO_DEFAULT_PATH, but monero no longer vendors it.
+# Point it at the system library instead of patching their cmake.
+cmake -D MONERO_DIR=\$SRC \\
+      -D Xmr_MINIUPNPC_LIBRARY=/usr/lib/x86_64-linux-gnu/libminiupnpc.a .. >/dev/null
+cmake --build . -j${JOBS} >/dev/null
+[ -x xmrblocks ] || { echo "no xmrblocks produced"; exit 1; }
+./xmrblocks --help >/dev/null 2>&1 || true
+
+echo "--> collecting"
+install -m 0755 xmrblocks /out/xmrblocks
+rm -rf /out/templates && cp -r templates /out/templates
+chmod -R a+rX /out/templates
+
+{
+  echo "artifact:        xmrblocks"
+  echo "built:           \$(date -u +%Y-%m-%dT%H:%M:%SZ)"
+  echo "build-image:     ${BUILD_IMAGE}"
+  echo "monero-version:  ${MONERO_VERSION}"
+  echo "monero-src-sha:  ${MONERO_SRC_SHA256}"
+  echo "explorer-commit: ${EXPLORER_COMMIT}"
+  echo "cmake-flags:     USE_DEVICE_TREZOR=OFF BUILD_TESTS=OFF CMAKE_BUILD_TYPE=Release"
+  echo "patches:         get_pruned_transaction_hash -> out-param form (monero >= 0.18.5.0)"
+  echo "xmrblocks-sha256: \$(sha256sum /out/xmrblocks | cut -d' ' -f1)"
+  echo "templates-sha256: \$(find /out/templates -type f | sort | xargs sha256sum | sha256sum | cut -d' ' -f1)"
+  echo "needed-libs:"
+  objdump -p /out/xmrblocks 2>/dev/null | awk '/NEEDED/{print "  " \$2}' | sort
+} > /out/MANIFEST
+INNER
+chmod +x "$WORK/build.sh"
+
+docker run --rm \
+  -v "$WORK":/build \
+  -v "$OUT_DIR":/out \
+  "$BUILD_IMAGE" bash /build/build.sh
+
+echo
+echo "==> done"
+sed -n '1,12p' "$OUT_DIR/MANIFEST"
+echo
+echo "    pin xmrblocks_sha256 in ansible/roles/xmrblocks/defaults/main.yml to:"
+grep '^xmrblocks-sha256:' "$OUT_DIR/MANIFEST" | awk '{print "    " $2}'

tofu/nodito/vms.auto.tfvars

@@ -58,7 +58,11 @@ vms = {
     vmid         = 2400
     name         = "monerod-box"
     cores        = 4
-    memory_mb    = 2048
+    # Raised from 2048 on 2026-09-20: monerod was OOM-killed hourly once the
+    # chain passed ~39% (1.74 GB anon-rss against 1973 MB of RAM), and the
+    # explorer shares this box. Applied in Proxmox; recorded here because the
+    # vm resource sets ignore_changes = all and will not reconcile it.
+    memory_mb    = 6144
     disk_size_gb = 10
     ipconfig0    = "ip=dhcp"
   },