monero: find the chain disk by its label, and a blank one by Proxmox slot

After the chain disk moved to the SSD, a reboot on 2026-10-04 swapped sda and
sdb, and monero_data_device: /dev/sdb then named the ROOT disk. The root-disk
guard caught it, but a routine run should never have been reading a device
name at all.

Every run now looks for the filesystem labelled monero-data first. If it is
there, monero_data_device is never consulted and the mount goes by that
filesystem's UUID. Only a blank disk is found by name, and the name is now
/dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi1: Proxmox passes the slot
in as the serial, so it is fixed before boot and survives `qm disk move`.

The by-id path is resolved with readlink before the root-disk guard compares
it, since a symlink path is never a prefix of /dev/sdb1 and the guard would
otherwise always pass. The UUID assert now also fails on two disks carrying
the same label.

Co-Authored-By: Claude Opus 5.5 (1M context) <noreply@anthropic.com>

ansible/host_vars/monerod_box_local/main.yml

@@ -12,11 +12,11 @@ monero_restricted_rpc_port: 18089
 # The explorer's HTTP port, read by the Caddy play on the edge host.
 xmrblocks_port: 8081
 
-# The 500 GB disk added to this VM in Proxmox as scsi1. Named here rather than
-# left to the role default so that "which disk holds the blockchain" is a
-# property of the machine, recorded next to the machine. The role only ever
-# uses it to create the filesystem; the mount itself goes by UUID.
-monero_data_device: /dev/sdb
+# The 500 GB chain disk, attached in Proxmox as scsi1. Named by that slot, which
+# is fixed when the disk is attached and survives reboots and storage moves -
+# not /dev/sdb, which it stopped being on 2026-10-04. Only read when the disk has
+# no monero-data filesystem yet; see roles/monero/defaults/main.yml.
+monero_data_device: /dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi1
 
 # Systemd services deployed on this host, monitored every 5 minutes.
 #

ansible/roles/monero/README.md

@@ -62,10 +62,15 @@ Three things there are load-bearing:
 
 - **The whole device, no partition table.** One disk, one job; a partition table
   is just another layer that can disagree with itself.
-- **Everything after mkfs goes by UUID.** `/dev/sdX` ordering is decided by the
-  kernel at boot. This estate has been bitten eight times by an identifier
-  written down once whose thing then moved; `monero_data_device` is used *only*
-  to create the filesystem.
+- **The device name is read once, ever.** Each run first looks for a filesystem
+  labelled `monero-data`; if it exists, `monero_data_device` is not consulted
+  and the mount goes by that filesystem's UUID. Only a blank disk is found by
+  name, and that name is the Proxmox slot as published under `/dev/disk/by-id`
+  (`...drive-scsi1`), fixed before the VM boots and kept across `qm disk move`.
+  Never `/dev/sdX`: the kernel assigns those in probe order, and on 2026-10-04 a
+  reboot swapped `sda` and `sdb`, leaving the old `/dev/sdb` value naming the
+  root disk. The root-disk guard caught it - but a routine run should never
+  have been reading the name in the first place.
 - **`RequiresMountsFor=` in the unit.** `nofail` in fstab means a missing disk
   does not drop a headless VM into an emergency shell - but without
   `RequiresMountsFor` monerod would then start, find an empty directory, and

ansible/roles/monero/defaults/main.yml

@@ -38,16 +38,25 @@ monero_data_dir: /var/lib/monero
 # The whole device, no partition table: this disk has one job and a partition
 # table would only add a layer that can disagree with itself.
 #
-# monero_data_device is used ONLY to create the filesystem, once. Everything
-# afterwards - fstab, the mount, the systemd unit - goes by UUID, because
-# /dev/sdX ordering is decided by the kernel at boot and is not a stable name
-# for anything. This estate has been bitten eight times by an identifier that
-# was written down once and then moved.
-monero_data_device: /dev/sdb
+# The disk is known by two names, for two different moments:
+#
+# monero_data_label is its identity once it holds a filesystem. Every run looks
+# for it first, and if it is there the device name is never consulted at all -
+# a routine run cannot be broken by a device name, because it does not read one.
+#
+# monero_data_device is used ONLY on the first run, to find the blank disk and
+# create that filesystem. It must be a name fixed before the VM boots: Proxmox
+# passes the slot ("scsi1") in as the disk's serial, and udev publishes it under
+# /dev/disk/by-id. That survives reboots and `qm disk move` alike. NEVER
+# /dev/sdX: the kernel hands those out in probe order, and on 2026-10-04 a reboot
+# after moving this disk to the SSD swapped sda and sdb - the value written here
+# then named the ROOT disk.
+monero_data_label: monero-data
+monero_data_device: /dev/disk/by-id/scsi-0QEMU_QEMU_HARDDISK_drive-scsi1
 monero_data_fstype: ext4
 # -m 0: the 5% ext4 reserve exists to stop root-owned daemons deadlocking a full
 # root filesystem. On a dedicated data disk it is 25 GB thrown away.
-monero_data_mkfs_opts: "-m 0 -L monero-data"
+monero_data_mkfs_opts: "-m 0 -L {{ monero_data_label }}"
 
 # --- Network ----------------------------------------------------------------
 # P2P is OUTBOUND ONLY. No inbound port is published from the edge host, so the

ansible/roles/monero/tasks/storage.yml

@@ -5,10 +5,16 @@
 # appears nowhere in Ansible, so a rebuild of that host would come up with the
 # chain silently missing. This role does it in code instead.
 
-- name: Check the Monero data device
-  ansible.builtin.stat:
-    path: "{{ monero_data_device }}"
-  register: monero_device
+# Does the disk already carry our filesystem? Its label is the identity from
+# here on. When it is found, the device name below is never read: everything
+# that follows works from the labelled filesystem, so a stale or reordered
+# device name cannot break a routine run. blkid exits 2 for "no such label".
+- name: Look for an existing Monero filesystem by its label
+  ansible.builtin.command: "blkid -L {{ monero_data_label }}"
+  register: monero_labelled_fs
+  changed_when: false
+  failed_when: monero_labelled_fs.rc not in [0, 2]
+  check_mode: false
 
 - name: Find the device backing the root filesystem
   ansible.builtin.command: findmnt -no SOURCE /
@@ -16,32 +22,59 @@
   changed_when: false
   check_mode: false
 
-# A guard, not ceremony. mkfs on the wrong device is unrecoverable, and
-# /dev/sdX names are assigned by the kernel at boot - the whole reason
-# everything below this point works by UUID.
-- name: Assert the data device is a real block device and is not the root disk
+# First run only: the disk is blank and has to be found by name.
+- name: Prepare a blank data disk
+  when: monero_labelled_fs.rc != 0
+  block:
+    # The configured name is a /dev/disk/by-id symlink. Resolve it before
+    # comparing it to anything: the root source is a kernel name like
+    # /dev/sdb1, and a symlink path is never a prefix of one, so comparing the
+    # unresolved name would make the root-disk guard below always pass.
+    - name: Resolve the configured data device to its kernel name
+      ansible.builtin.command: "readlink -e {{ monero_data_device }}"
+      register: monero_device_path
+      changed_when: false
+      failed_when: false
+      check_mode: false
+
+    - name: Check the Monero data device
+      ansible.builtin.stat:
+        path: "{{ monero_device_path.stdout | default('', true) or monero_data_device }}"
+      register: monero_device
+
+    - name: Find the disk the root filesystem lives on
+      ansible.builtin.command: "lsblk -no PKNAME {{ monero_root_source.stdout }}"
+      register: monero_root_disk
+      changed_when: false
+      check_mode: false
+
+    # A guard, not ceremony. mkfs on the wrong device is unrecoverable.
+    - name: Assert the data device is a real block device and is not the root disk
       ansible.builtin.assert:
         that:
+          - monero_device_path.rc == 0
           - monero_device.stat.exists
           - monero_device.stat.isblk | default(false)
-      - not monero_root_source.stdout.startswith(monero_data_device)
+          - monero_device_path.stdout != '/dev/' ~ (monero_root_disk.stdout | trim)
+          - not monero_root_source.stdout.startswith(monero_device_path.stdout)
         quiet: true
         fail_msg: >-
-      {{ monero_data_device }} is not a usable data device, or it is the disk
-      the root filesystem lives on ({{ monero_root_source.stdout }}).
-      Refusing to touch it. Check `lsblk` on the host.
+          {{ monero_data_device }} (-> {{ monero_device_path.stdout | default('nothing', true) }})
+          is not a usable data device, or it is the disk the root filesystem
+          lives on ({{ monero_root_source.stdout }}). Refusing to touch it.
+          Check `ls -l /dev/disk/by-id` on the host.
 
-- name: Read any existing filesystem on the data device
-  ansible.builtin.command: "blkid -o value -s TYPE {{ monero_data_device }}"
+    - name: Read any existing filesystem on the data device
+      ansible.builtin.command: "blkid -o value -s TYPE {{ monero_device_path.stdout }}"
       register: monero_existing_fs
       changed_when: false
       failed_when: false
       check_mode: false
 
-# community.general.filesystem is idempotent and will not rebuild a filesystem
-# that is already the requested type, but it would happily create one on a disk
-# holding something it does not recognise. Say so out loud instead.
-- name: Refuse to reformat a disk that already carries a different filesystem
+    # No monero-data label was found, so a filesystem here is something else.
+    # community.general.filesystem would leave an ext4 of any label alone but
+    # happily format over a disk it does not recognise. Say so out loud instead.
+    - name: Refuse to reformat a disk that already carries a different filesystem
       ansible.builtin.assert:
         that:
           - monero_existing_fs.stdout | trim in ['', monero_data_fstype]
@@ -50,14 +83,16 @@
           {{ monero_data_device }} already holds a '{{ monero_existing_fs.stdout | trim }}'
           filesystem, not '{{ monero_data_fstype }}'. Refusing to overwrite it.
 
-- name: Create the filesystem on the data device
+    - name: Create the filesystem on the data device
       community.general.filesystem:
         fstype: "{{ monero_data_fstype }}"
-    dev: "{{ monero_data_device }}"
+        dev: "{{ monero_device_path.stdout }}"
         opts: "{{ monero_data_mkfs_opts }}"
 
+# By label: on the first run the filesystem was just created with it, on every
+# other run it was found by it.
 - name: Read the filesystem UUID
-  ansible.builtin.command: "blkid -o value -s UUID {{ monero_data_device }}"
+  ansible.builtin.command: "blkid -o value -s UUID -t LABEL={{ monero_data_label }}"
   register: monero_fs_uuid
   changed_when: false
   failed_when: false
@@ -67,18 +102,22 @@
 # without one. On a --check run against a disk that has no filesystem yet this
 # is expected and unavoidable: check mode did not create the filesystem, so
 # there is no UUID to read. Say that, rather than leaving a bare blkid rc=2.
-- name: Assert the UUID looks like a UUID
+# Exactly one: two disks with this label (a cloned disk, say) would make the
+# mount below ambiguous.
+- name: Assert exactly one UUID was found
   ansible.builtin.assert:
     that:
       - monero_fs_uuid.stdout | trim | length == 36
     quiet: true
     fail_msg: >-
-      No filesystem UUID on {{ monero_data_device }}.
-      {% if ansible_check_mode %}This is expected under --check when the disk
+      Expected exactly one filesystem labelled {{ monero_data_label }}, found:
+      '{{ monero_fs_uuid.stdout | trim }}'.
+      {% if ansible_check_mode %}No UUID is expected under --check when the disk
       has not been formatted yet - check mode cannot create the filesystem, so
       it cannot dry-run the mount either. Run without --check once, then
-      --check is meaningful from then on.{% else %}mkfs appears to have failed;
-      check `lsblk` and `blkid` on the host.{% endif %}
+      --check is meaningful from then on.{% else %}If none: mkfs appears to have
+      failed. If several: more than one disk carries the label. Check `lsblk -f`
+      on the host.{% endif %}
 
 # Same owner and mode as the "Own the mounted data directory" task below, and
 # that is deliberate rather than duplication. Before the disk is mounted this
@@ -93,7 +132,7 @@
     group: "{{ monero_group }}"
     mode: '0750'
 
-# By UUID, never by /dev/sdb. nofail so a missing disk does not drop a headless
+# By UUID, never by a device name. nofail so a missing disk does not drop a headless
 # VM into an emergency shell - monerod is stopped from starting by
 # RequiresMountsFor= in its unit instead, which the systemd monitor then reports.
 # noatime because LMDB touches a lot of pages and none of it wants an atime write.