monero: check the node once a day, not every five minutes
A wedged explorer produced 83 Signal messages in six hours. Nothing about that
was a monitoring success: the checks were right, the cadence was wrong.
monerod-box is a Monero node in the middle of a multi-week initial sync on a
rotating disk. A 5-minute poll tells you nothing a daily one does not, and when
something breaks it turns one fault into a message every five minutes until
somebody silences the phone - which is the failure mode that makes people stop
reading alerts entirely.
So both Monero probes move to OnCalendar:
monerod *-*-* 05:00:00 RandomizedDelaySec=900
xmrblocks *-*-* 05:30:00 RandomizedDelaySec=900
systemd units (infra/401 per-host timer) *-*-* 05:15:00
30 minutes apart on purpose: both read the same LMDB, and the explorer's check
renders a full page out of it - a cold one measured 68 seconds. Running them
together would have each paying the other's cache misses.
OnCalendar rather than OnUnitActiveSec: an interval timer re-bases on every
restart, so "daily" silently becomes "a day after whenever it last came up".
── The window and the cadence are ONE decision ─────────────────────────────
The Gatus heartbeat moves with them, to 26h. Not 24h: the window must EXCEED
the push interval, or a check reporting exactly on schedule races its own
deadline and alerts on jitter alone. With a 900s randomized delay the true
worst case is ~24h15m, so 26h leaves real headroom.
The same logic drops the pulled public-site checks to a 24h interval - and
their failure-threshold from 3 to 1 with it. Three failures at 5m is 15 minutes
of tolerance; three at 24h would be THREE DAYS before anyone heard. A daily
check has no room for a blip, so it alerts on the first.
── Scoping ────────────────────────────────────────────────────────────────
infra/401's timer is ONE PER HOST and iterates every unit in
monitored_services, so slowing it slows all of them. That is safe here only
because monerod-box runs nothing but Monero units; the knobs are therefore in
its host_vars rather than the role, and both 401 and 403 now take a per-host
(resp. per-probe) override with the old 11m as the default. Every other host
is untouched.
Host liveness and disk are deliberately NOT slowed. They answer "is the box
alive", which is still wanted within minutes.
The role-level OnCalendar defaults are prefixed (monero_healthcheck_on_calendar,
xmrblocks_healthcheck_on_calendar) because the generic `healthcheck` role owns
the unprefixed name, and an unprefixed default here would shadow it for any
play that includes both.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This commit is contained in:
parent
defb2f6333
commit
361683681e
8 changed files with 97 additions and 13 deletions
|
|
@ -29,3 +29,24 @@ monero_data_device: /dev/sdb
|
|||
monitored_services:
|
||||
- monerod
|
||||
- xmrblocks
|
||||
|
||||
# ...but on THIS host, once a day rather than every five minutes.
|
||||
#
|
||||
# Both units are a Monero node in the middle of a multi-week initial sync on a
|
||||
# rotating disk. There is nothing a 5-minute poll reports that a daily one does
|
||||
# not, and every failing poll was another Signal message - 83 of them in six
|
||||
# hours while the explorer was wedged.
|
||||
#
|
||||
# This is safe to scope to the host because monerod-box runs ONLY Monero units.
|
||||
# Do not copy it to a box with a mixed workload: the timer is one per host and
|
||||
# iterates every unit in monitored_services, so slowing it slows all of them.
|
||||
#
|
||||
# 26h, not 24h: the window must EXCEED the push interval, or a check reporting
|
||||
# exactly on schedule races its own deadline and alerts on jitter alone. The
|
||||
# 900s randomized delay puts the real worst case at ~24h15m.
|
||||
#
|
||||
# Host liveness and disk are deliberately NOT slowed - they answer "is the box
|
||||
# alive", which is still wanted within minutes. See infra/400.
|
||||
service_health_on_calendar: "*-*-* 05:15:00"
|
||||
service_health_randomized_delay: "900"
|
||||
service_health_heartbeat: "26h"
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue